[PATCH 01/20] mtd: pxa3xx-nand: replace pxa_request_dma with dmaengine
Daniel Mack
zonque at gmail.com
Wed Aug 7 11:33:50 EDT 2013
From: Zhangfei Gao <zhangfei.gao at marvell.com>
[zonque at gmail.com: rebased in top of l2-mtd.git. The newly introduced
ARCH_HAS_DMA hack was changed into a check for CONFIG_HAS_DMA]
Signed-off-by: Zhangfei Gao <zhangfei.gao at marvell.com>
Signed-off-by: Daniel Mack <zonque at gmail.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 115 ++++++++++++++++++++++-------------------
1 file changed, 63 insertions(+), 52 deletions(-)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index a2a54f6..736673a 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -24,14 +24,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
-
-#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
-#define ARCH_HAS_DMA
-#endif
-
-#ifdef ARCH_HAS_DMA
-#include <mach/dma.h>
-#endif
+#include <linux/dmaengine.h>
#include <linux/platform_data/mtd-nand-pxa3xx.h>
@@ -172,9 +165,7 @@ struct pxa3xx_nand_info {
unsigned char *data_buff;
unsigned char *oob_buff;
dma_addr_t data_buff_phys;
- int data_dma_ch;
- struct pxa_dma_desc *data_desc;
- dma_addr_t data_desc_addr;
+ struct dma_chan *data_dma_ch;
struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
unsigned int state;
@@ -388,25 +379,39 @@ static void handle_data_pio(struct pxa3xx_nand_info *info)
}
}
-#ifdef ARCH_HAS_DMA
+#ifdef CONFIG_HAS_DMA
+static void dma_complete_func(void *data)
+{
+ struct pxa3xx_nand_info *info = data;
+
+ info->state = STATE_DMA_DONE;
+}
+
static void start_data_dma(struct pxa3xx_nand_info *info)
{
- struct pxa_dma_desc *desc = info->data_desc;
+ struct dma_device *dma_dev;
+ struct dma_async_tx_descriptor *tx = NULL;
+ dma_addr_t dma_src_addr, dma_dst_addr;
+ dma_cookie_t cookie;
int dma_len = ALIGN(info->data_size + info->oob_size, 32);
+ struct dma_slave_config conf;
- desc->ddadr = DDADR_STOP;
- desc->dcmd = DCMD_ENDIRQEN | DCMD_WIDTH4 | DCMD_BURST32 | dma_len;
+ dma_dev = info->data_dma_ch->device;
switch (info->state) {
case STATE_DMA_WRITING:
- desc->dsadr = info->data_buff_phys;
- desc->dtadr = info->mmio_phys + NDDB;
- desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
+ dma_src_addr = info->data_buff_phys;
+ dma_dst_addr = info->mmio_phys + NDDB;
+ conf.direction = DMA_MEM_TO_DEV;
+ conf.dst_maxburst = 32;
+ conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
break;
case STATE_DMA_READING:
- desc->dtadr = info->data_buff_phys;
- desc->dsadr = info->mmio_phys + NDDB;
- desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
+ dma_src_addr = info->mmio_phys + NDDB;
+ dma_dst_addr = info->data_buff_phys;
+ conf.direction = DMA_DEV_TO_MEM;
+ conf.src_maxburst = 32;
+ conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
break;
default:
dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
@@ -414,26 +419,25 @@ static void start_data_dma(struct pxa3xx_nand_info *info)
BUG();
}
- DRCMR(info->drcmr_dat) = DRCMR_MAPVLD | info->data_dma_ch;
- DDADR(info->data_dma_ch) = info->data_desc_addr;
- DCSR(info->data_dma_ch) |= DCSR_RUN;
-}
-
-static void pxa3xx_nand_data_dma_irq(int channel, void *data)
-{
- struct pxa3xx_nand_info *info = data;
- uint32_t dcsr;
+ conf.slave_id = info->drcmr_dat;
+ dmaengine_slave_config(info->data_dma_ch, &conf);
+ tx = dma_dev->device_prep_dma_memcpy(info->data_dma_ch, dma_dst_addr,
+ dma_src_addr, dma_len, 0);
+ if (!tx) {
+ dev_err(&info->pdev->dev, "Failed to prepare DMA memcpy\n");
+ return;
+ }
- dcsr = DCSR(channel);
- DCSR(channel) = dcsr;
+ tx->callback = dma_complete_func;
+ tx->callback_param = info;
- if (dcsr & DCSR_BUSERR) {
- info->retcode = ERR_DMABUSERR;
+ cookie = tx->tx_submit(tx);
+ if (dma_submit_error(cookie)) {
+ dev_err(&info->pdev->dev, "Failed to do DMA tx_submit\n");
+ return;
}
- info->state = STATE_DMA_DONE;
- enable_int(info, NDCR_INT_MASK);
- nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
+ dma_async_issue_pending(info->data_dma_ch);
}
#else
static void start_data_dma(struct pxa3xx_nand_info *info)
@@ -455,6 +459,7 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
}
status = nand_readl(info, NDSR);
+ nand_writel(info, NDSR, status);
if (status & NDSR_DBERR)
info->retcode = ERR_DBERR;
@@ -463,7 +468,6 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) {
/* whether use dma to transfer data */
if (info->use_dma) {
- disable_int(info, NDCR_INT_MASK);
info->state = (status & NDSR_RDDREQ) ?
STATE_DMA_READING : STATE_DMA_WRITING;
start_data_dma(info);
@@ -792,6 +796,9 @@ static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
struct pxa3xx_nand_info *info = host->info_data;
int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
+ if (len > mtd->oobsize)
+ info->use_dma = use_dma;
+
memcpy(buf, info->data_buff + info->buf_start, real_len);
info->buf_start += real_len;
}
@@ -803,6 +810,9 @@ static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
struct pxa3xx_nand_info *info = host->info_data;
int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
+ if (len > mtd->oobsize)
+ info->use_dma = use_dma;
+
memcpy(info->data_buff + info->buf_start, buf, real_len);
info->buf_start += real_len;
}
@@ -908,11 +918,11 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
*/
#define MAX_BUFF_SIZE (PAGE_SIZE*2)
-#ifdef ARCH_HAS_DMA
+#ifdef CONFIG_HAS_DMA
static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
{
struct platform_device *pdev = info->pdev;
- int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc);
+ dma_cap_mask_t mask;
if (use_dma == 0) {
info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
@@ -928,26 +938,27 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
return -ENOMEM;
}
- info->data_desc = (void *)info->data_buff + data_desc_offset;
- info->data_desc_addr = info->data_buff_phys + data_desc_offset;
-
- info->data_dma_ch = pxa_request_dma("nand-data", DMA_PRIO_LOW,
- pxa3xx_nand_data_dma_irq, info);
- if (info->data_dma_ch < 0) {
- dev_err(&pdev->dev, "failed to request data dma\n");
- dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
- info->data_buff, info->data_buff_phys);
- return info->data_dma_ch;
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+ info->data_dma_ch = dma_request_channel(mask, NULL, NULL);
+ if (!info->data_dma_ch) {
+ dev_info(&pdev->dev, "Failed to request DMA channel\n");
+ goto dma_request_fail;
}
return 0;
+
+dma_request_fail:
+ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
+ info->data_buff, info->data_buff_phys);
+ return -EAGAIN;
}
static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
{
struct platform_device *pdev = info->pdev;
if (use_dma) {
- pxa_free_dma(info->data_dma_ch);
+ dma_release_channel(info->data_dma_ch);
dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
} else {
@@ -1295,7 +1306,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
struct pxa3xx_nand_info *info;
int ret, cs, probe_success;
-#ifndef ARCH_HAS_DMA
+#ifndef CONFIG_HAS_DMA
if (use_dma) {
use_dma = 0;
dev_warn(&pdev->dev,
--
1.8.3.1
More information about the linux-arm-kernel
mailing list