[PATCH 8/8] ARM: at91/dt: use periph id macros for sama5d3 interrupt definitions
Boris BREZILLON
b.brezillon at overkiz.com
Thu Aug 1 03:01:00 EDT 2013
This patch make use of the peripheral id macros defined in
dt-bindings/at91/sama5d3/peripherals.h to register peripheral
interrupts.
Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
---
arch/arm/boot/dts/sama5d3.dtsi | 83 ++++++++++++++++++++--------------------
1 file changed, 42 insertions(+), 41 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index a1d5e25..01c36b6 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/at91/sama5d3/peripherals.h>
/ {
model = "Atmel SAMA5D3 family SoC";
@@ -67,7 +68,7 @@
mmc0: mmc at f0000000 {
compatible = "atmel,hsmci";
reg = <0xf0000000 0x600>;
- interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <SAMA5D3_ID_HSMCI0 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
@@ -82,7 +83,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <SAMA5D3_ID_SPI0 IRQ_TYPE_LEVEL_HIGH 3>;
dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
<&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
dma-names = "tx", "rx";
@@ -94,7 +95,7 @@
ssc0: ssc at f0008000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0008000 0x4000>;
- interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
+ interrupts = <SAMA5D3_ID_SSC0 IRQ_TYPE_LEVEL_HIGH 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
@@ -103,7 +104,7 @@
can0: can at f000c000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf000c000 0x300>;
- interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <SAMA5D3_ID_CAN0 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_rx_tx>;
status = "disabled";
@@ -112,13 +113,13 @@
tcb0: timer at f0010000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf0010000 0x100>;
- interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <SAMA5D3_ID_TC0 IRQ_TYPE_LEVEL_HIGH 0>;
};
i2c0: i2c at f0014000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0014000 0x4000>;
- interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <SAMA5D3_ID_TWI0 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
<&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
dma-names = "tx", "rx";
@@ -132,7 +133,7 @@
i2c1: i2c at f0018000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0018000 0x4000>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <SAMA5D3_ID_TWI1 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
<&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
dma-names = "tx", "rx";
@@ -146,7 +147,7 @@
usart0: serial at f001c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf001c000 0x100>;
- interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <SAMA5D3_ID_USART0 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
@@ -155,7 +156,7 @@
usart1: serial at f0020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf0020000 0x100>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <SAMA5D3_ID_USART1 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
@@ -164,7 +165,7 @@
macb0: ethernet at f0028000 {
compatible = "cdns,pc302-gem", "cdns,gem";
reg = <0xf0028000 0x100>;
- interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <SAMA5D3_ID_GMAC IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
status = "disabled";
@@ -173,14 +174,14 @@
isi: isi at f0034000 {
compatible = "atmel,at91sam9g45-isi";
reg = <0xf0034000 0x4000>;
- interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <SAMA5D3_ID_ISI IRQ_TYPE_LEVEL_HIGH 5>;
status = "disabled";
};
mmc1: mmc at f8000000 {
compatible = "atmel,hsmci";
reg = <0xf8000000 0x600>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <SAMA5D3_ID_HSMCI1 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
@@ -193,7 +194,7 @@
mmc2: mmc at f8004000 {
compatible = "atmel,hsmci";
reg = <0xf8004000 0x600>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <SAMA5D3_ID_HSMCI2 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
dma-names = "rxtx";
pinctrl-names = "default";
@@ -208,7 +209,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xf8008000 0x100>;
- interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <SAMA5D3_ID_SPI1 IRQ_TYPE_LEVEL_HIGH 3>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
<&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
dma-names = "tx", "rx";
@@ -220,7 +221,7 @@
ssc1: ssc at f800c000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf800c000 0x4000>;
- interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
+ interrupts = <SAMA5D3_ID_SSC1 IRQ_TYPE_LEVEL_HIGH 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
@@ -229,7 +230,7 @@
can1: can at f8010000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf8010000 0x300>;
- interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <SAMA5D3_ID_CAN1 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_rx_tx>;
};
@@ -237,13 +238,13 @@
tcb1: timer at f8014000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8014000 0x100>;
- interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <SAMA5D3_ID_TC1 IRQ_TYPE_LEVEL_HIGH 0>;
};
adc0: adc at f8018000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xf8018000 0x100>;
- interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <SAMA5D3_ID_ADC IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <
&pinctrl_adc0_adtrg
@@ -297,7 +298,7 @@
tsadcc: tsadcc at f8018000 {
compatible = "atmel,at91sam9x5-tsadcc";
reg = <0xf8018000 0x4000>;
- interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <SAMA5D3_ID_ADC IRQ_TYPE_LEVEL_HIGH 5>;
atmel,tsadcc_clock = <300000>;
atmel,filtering_average = <0x03>;
atmel,pendet_debounce = <0x08>;
@@ -309,7 +310,7 @@
i2c2: i2c at f801c000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf801c000 0x4000>;
- interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <SAMA5D3_ID_TWI2 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
<&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
dma-names = "tx", "rx";
@@ -321,7 +322,7 @@
usart2: serial at f8020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x100>;
- interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <SAMA5D3_ID_USART2 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
@@ -330,7 +331,7 @@
usart3: serial at f8024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x100>;
- interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <SAMA5D3_ID_USART3 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
@@ -339,7 +340,7 @@
macb1: ethernet at f802c000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
- interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <SAMA5D3_ID_EMAC IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb1_rmii>;
status = "disabled";
@@ -348,32 +349,32 @@
sha at f8034000 {
compatible = "atmel,sam9g46-sha";
reg = <0xf8034000 0x100>;
- interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <SAMA5D3_ID_SHA IRQ_TYPE_LEVEL_HIGH 0>;
};
aes at f8038000 {
compatible = "atmel,sam9g46-aes";
reg = <0xf8038000 0x100>;
- interrupts = <43 4 0>;
+ interrupts = <SAMA5D3_ID_AES 4 0>;
};
tdes at f803c000 {
compatible = "atmel,sam9g46-tdes";
reg = <0xf803c000 0x100>;
- interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <SAMA5D3_ID_TDES IRQ_TYPE_LEVEL_HIGH 0>;
};
dma0: dma-controller at ffffe600 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffe600 0x200>;
- interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <SAMA5D3_ID_DMA0 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
};
dma1: dma-controller at ffffe800 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffe800 0x200>;
- interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <SAMA5D3_ID_DMA1 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
};
@@ -385,7 +386,7 @@
dbgu: serial at ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <SAMA5D3_ID_DBGU IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
@@ -396,7 +397,7 @@
compatible = "atmel,sama5d3-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
- atmel,external-irqs = <47>;
+ atmel,external-irqs = <SAMA5D3_ID_IRQ0>;
};
pinctrl at fffff200 {
@@ -819,7 +820,7 @@
pioA: gpio at fffff200 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x100>;
- interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <SAMA5D3_ID_PIOA IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -829,7 +830,7 @@
pioB: gpio at fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x100>;
- interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <SAMA5D3_ID_PIOB IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -839,7 +840,7 @@
pioC: gpio at fffff600 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x100>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <SAMA5D3_ID_PIOC IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -849,7 +850,7 @@
pioD: gpio at fffff800 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x100>;
- interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <SAMA5D3_ID_PIOD IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -859,7 +860,7 @@
pioE: gpio at fffffa00 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x100>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <SAMA5D3_ID_PIOE IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -880,7 +881,7 @@
pit: timer at fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91_ID_PIT IRQ_TYPE_LEVEL_HIGH 5>;
};
watchdog at fffffe40 {
@@ -892,7 +893,7 @@
rtc at fffffeb0 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffeb0 0x30>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH 7>;
};
};
@@ -902,7 +903,7 @@
compatible = "atmel,at91sam9rl-udc";
reg = <0x00500000 0x100000
0xf8030000 0x4000>;
- interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <SAMA5D3_ID_UDPHS IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
ep0 {
@@ -1014,14 +1015,14 @@
usb1: ohci at 00600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
- interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <SAMA5D3_ID_UHPHS IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
usb2: ehci at 00700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
- interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <SAMA5D3_ID_UHPHS IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
@@ -1037,7 +1038,7 @@
0xffffc000 0x00000070 /* NFC HSMC regs */
0x00200000 0x00100000 /* NFC SRAM banks */
>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <SAMA5D3_ID_HSMC IRQ_TYPE_LEVEL_HIGH 6>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
--
1.7.9.5
More information about the linux-arm-kernel
mailing list