[PATCH 0/3] Add support for the Nuvoton NAU7802 ADC to the cfa10049
Alexandre Belloni
alexandre.belloni at free-electrons.com
Thu Apr 18 11:38:53 EDT 2013
Hi,
This patchset adds support for the 3 Nuvoton NAU7802 ADCs presetn on the
CFA-10049 board from Crystalfontz. The first patch adds the driver, the next
ones are adding them in the DT after switching the second i2c bus to bitbanging
following a lot of timeout issues we have on that bus.
Regards,
Alexandre Belloni (1):
iio: Add Nuvoton NAU7802 ADC driver
Maxime Ripard (2):
ARM: mxs: cfa10049: Switch bus i2c1 to bitbanging
ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree
.../bindings/iio/adc/nuvoton-nau7802.txt | 17 +
arch/arm/boot/dts/imx28-cfa10049.dts | 126 ++--
drivers/iio/adc/Kconfig | 9 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/nau7802.c | 644 ++++++++++++++++++++
5 files changed, 754 insertions(+), 43 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
create mode 100644 drivers/iio/adc/nau7802.c
--
1.7.10.4
More information about the linux-arm-kernel
mailing list