The usual scheme to initialize a cpuidle driver on a SMP is:
cpuidle_register_driver(drv);
for_each_possible_cpu(cpu) {
device = &per_cpu(cpuidle_dev, cpu);
cpuidle_register_device(device);
}
This code is duplicated in each cpuidle driver.
On UP systems, it is done this way:
cpuidle_register_driver(drv);
device = &per_cpu(cpuidle_dev, cpu);
cpuidle_register_device(device);
On UP, the macro 'for_each_cpu' does one iteration:
#define for_each_cpu(cpu, mask) \
for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
Hence, the initialization loop is the same for UP than SMP.
Beside, we saw different bugs / mis-initialization / return code unchecked in
the different drivers, the code is duplicated including bugs. After fixing all
these ones, it appears the initialization pattern is the same for everyone.
Please note, some drivers are doing dev->state_count = drv->state_count. This is
not necessary because it is done by the cpuidle_enable_device function in the
cpuidle framework. This is true, until you have the same states for all your
devices. Otherwise, the 'low level' API should be used instead with the specific
initialization for the driver.
Let's add a wrapper function doing this initialization with a cpumask parameter
for the coupled idle states and use it for all the drivers.
That will save a lot of LOC, consolidate the code, and the modifications in the
future could be done in a single place. Another benefit is the consolidation of
the cpuidle_device variable which is now in the cpuidle framework and no longer
spread accross the different arch specific drivers.
Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
---
Documentation/cpuidle/driver.txt | 6 ++++
drivers/cpuidle/cpuidle.c | 72 ++++++++++++++++++++++++++++++++++++++
include/linux/cpuidle.h | 9 +++--
3 files changed, 85 insertions(+), 2 deletions(-)
diff --git a/Documentation/cpuidle/driver.txt b/Documentation/cpuidle/driver.txt
index 7a9e09e..1b0d81d 100644
--- a/Documentation/cpuidle/driver.txt
+++ b/Documentation/cpuidle/driver.txt
@@ -15,11 +15,17 @@ has mechanisms in place to support actual entry-exit into CPU idle states.
cpuidle driver initializes the cpuidle_device structure for each CPU device
and registers with cpuidle using cpuidle_register_device.
+If all the idle states are the same, the wrapper function cpuidle_register
+could be used instead.
+
It can also support the dynamic changes (like battery <-> AC), by using
cpuidle_pause_and_lock, cpuidle_disable_device and cpuidle_enable_device,
cpuidle_resume_and_unlock.
Interfaces:
+extern int cpuidle_register(struct cpuidle_driver *drv,
+ const struct cpumask *const coupled_cpus);
+extern int cpuidle_unregister(struct cpuidle_driver *drv);
extern int cpuidle_register_driver(struct cpuidle_driver *drv);
extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
extern int cpuidle_register_device(struct cpuidle_device *dev);
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 0da795b..49e8d30 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -24,6 +24,7 @@
#include "cpuidle.h"
DEFINE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
+DEFINE_PER_CPU(struct cpuidle_device, cpuidle_dev);
DEFINE_MUTEX(cpuidle_lock);
LIST_HEAD(cpuidle_detected_devices);
@@ -453,6 +454,77 @@ void cpuidle_unregister_device(struct cpuidle_device *dev)
EXPORT_SYMBOL_GPL(cpuidle_unregister_device);
+/*
+ * cpuidle_unregister: unregister a driver and the devices. This function
+ * can be used only if the driver has been previously registered through
+ * the cpuidle_register function.
+ *
+ * @drv: a valid pointer to a struct cpuidle_driver
+ */
+void cpuidle_unregister(struct cpuidle_driver *drv)
+{
+ int cpu;
+ struct cpuidle_device *device;
+
+ for_each_possible_cpu(cpu) {
+ device = &per_cpu(cpuidle_dev, cpu);
+ cpuidle_unregister_device(device);
+ }
+
+ cpuidle_unregister_driver(drv);
+}
+EXPORT_SYMBOL_GPL(cpuidle_unregister);
+
+/**
+ * cpuidle_register: registers the driver and the cpu devices with the
+ * coupled_cpus passed as parameter. This function is used for all common
+ * initialization pattern there are in the arch specific drivers. The
+ * devices is globally defined in this file.
+ *
+ * @drv : a valid pointer to a struct cpuidle_driver
+ * @coupled_cpus: a cpumask for the coupled states
+ *
+ * Returns 0 on success, < 0 otherwise
+ */
+int cpuidle_register(struct cpuidle_driver *drv,
+ const struct cpumask *const coupled_cpus)
+{
+ int ret, cpu;
+ struct cpuidle_device *device;
+
+ ret = cpuidle_register_driver(drv);
+ if (ret) {
+ pr_err("failed to register cpuidle driver\n");
+ return ret;
+ }
+
+ for_each_possible_cpu(cpu) {
+ device = &per_cpu(cpuidle_dev, cpu);
+ device->cpu = cpu;
+
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
+ /*
+ * On multiplatform for ARM, the coupled idle states could
+ * enabled in the kernel even if the cpuidle driver does not
+ * use it. Note, coupled_cpus is a struct copy.
+ */
+ if (coupled_cpus)
+ device->coupled_cpus = *coupled_cpus;
+#endif
+ ret = cpuidle_register_device(device);
+ if (!ret)
+ continue;
+
+ pr_err("Failed to register cpuidle device for cpu%d\n", cpu);
+
+ cpuidle_unregister(drv);
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpuidle_register);
+
#ifdef CONFIG_SMP
static void smp_callback(void *v)
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 79e3811..3c86faa 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -123,7 +123,9 @@ extern void cpuidle_driver_unref(void);
extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
extern int cpuidle_register_device(struct cpuidle_device *dev);
extern void cpuidle_unregister_device(struct cpuidle_device *dev);
-
+extern int cpuidle_register(struct cpuidle_driver *drv,
+ const struct cpumask *const coupled_cpus);
+extern void cpuidle_unregister(struct cpuidle_driver *drv);
extern void cpuidle_pause_and_lock(void);
extern void cpuidle_resume_and_unlock(void);
extern void cpuidle_pause(void);
@@ -148,7 +150,10 @@ static inline void cpuidle_unregister_driver(struct cpuidle_driver *drv) { }
static inline int cpuidle_register_device(struct cpuidle_device *dev)
{return -ENODEV; }
static inline void cpuidle_unregister_device(struct cpuidle_device *dev) { }
-
+static inline int cpuidle_register(struct cpuidle_driver *drv,
+ const struct cpumask *const coupled_cpus)
+{return -ENODEV; }
+static inline void cpuidle_unregister(struct cpuidle_driver *drv) { }
static inline void cpuidle_pause_and_lock(void) { }
static inline void cpuidle_resume_and_unlock(void) { }
static inline void cpuidle_pause(void) { }
--
1.7.9.5