[PATCH v2 0/3] ARM: S3C24XX: Add devicetree support for s3c2416

[Heiko Stübner]

Am Mittwoch, 10. April 2013, 12:15:48 schrieb Kukjin Kim:
> Heiko Stübner wrote:
> > This is the second installment of beginning devicetree support the
> > Samsung S3C24xx architectures and focuses on the s3c2416 for now.
> > 
> > Included is the devicetree support for the s3c24xx irq controller and
> > basic support for smdk2416 boards, which can sucessfully boot.
> > 
> > 
> > After the discussion with Thomas Abraham on v1 and staring to long at all
> > of
> > this, I'm not even sure if having the interrupt mapping in the binding
> > is the correct way to go anymore.
> > 
> > The key positive aspect of this solution is, that after everything is
> > running
> > via dt all the SoC specific mapping tables in the driver can go away,
> > cutting
> > its length in half.
> > 
> > The other option would be as Thomas suggested to define specific irq-
> > controller
> > types (i.e. s3c2416-intc, s3c2443-intc, ... resulting in 16 types) and
> > keep
> > the mapping data in the code, as it is now.
> > 
> > So I would be very thankful for a bit of guidance on what is the better
> > way.
> > 
> > 
> > The series depends on the finalized s3c24xx irq rework, which probably
> > won't
> > make it into 3.9 and also the clocksource dt support by Tomasz Figa,
> > which are not in any tree yet.
> > 
> > 
> > Changes since v1:
> > - adapt to changes in the underlying s3c24xx irq rework
> > 
> >   = more shared init code
> > 
> > - use irqchip infrastructure
> > - limit number of possible irq-types to not encode implementation details
> > 
> >   into the binding
> > 
> > - include new samsung-clocksource
> > 
> > Heiko Stuebner (3):
> >   ARM: S3C24XX: move irq driver to drivers/irqchip
> >   irqchip: irq-s3c24xx: add devicetree support
> >   ARM: S3C24XX: Add devicetree support and dt-board file for s3c2416 SoCs
> >  
> >  .../interrupt-controller/samsung,s3c24xx-irq.txt   |   53 ++++++
> >  arch/arm/boot/dts/Makefile                         |    1 +
> >  arch/arm/boot/dts/s3c2416-smdk2416.dts             |   79 ++++++++
> >  arch/arm/boot/dts/s3c2416.dtsi                     |  193
> >  ++++++++++++++++++++ arch/arm/boot/dts/s3c24xx.dtsi                    
> >  |  165 +++++++++++++++++ arch/arm/mach-s3c24xx/Kconfig                 
> >      |   10 +
> >  arch/arm/mach-s3c24xx/Makefile                     |    3 +-
> >  arch/arm/mach-s3c24xx/mach-s3c2416-dt.c            |   91 +++++++++
> >  drivers/irqchip/Makefile                           |    1 +
> >  .../irq.c => drivers/irqchip/irq-s3c24xx.c         |  128 +++++++++++++
> >  10 files changed, 723 insertions(+), 1 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/interrupt-
> > 
> > controller/samsung,s3c24xx-irq.txt
> > 
> >  create mode 100644 arch/arm/boot/dts/s3c2416-smdk2416.dts
> >  create mode 100644 arch/arm/boot/dts/s3c2416.dtsi
> >  create mode 100644 arch/arm/boot/dts/s3c24xx.dtsi
> >  create mode 100644 arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
> >  rename arch/arm/mach-s3c24xx/irq.c => drivers/irqchip/irq-s3c24xx.c
> >  (92%)
> > 
> > --
> > 1.7.2.3
> 
> Basically, looks good to me and thanks for your effort.
> 
> BTW, if you don't mind, would be better to send to upstream next time.
> Because I need to consider other s3c24xx SoCs for DT...

hehe, you're digging up quite old stuff :-)

This of course got superseeded by the different approach to s3c24xx-irq dt-
support and the pinctrl work.

I'll send a new version of the dt support which takes into account all the 
recent changes in the next couple of days.

Of course I'm ok with delaying this until 3.11. At least all the building 
blocks (irq and pinctrl) are there now.


Heiko