[PATCH v2 0/3] ARM: S3C24XX: Add devicetree support for s3c2416

[Kukjin Kim]

Heiko Stübner wrote:
> 
> This is the second installment of beginning devicetree support the
> Samsung S3C24xx architectures and focuses on the s3c2416 for now.
> 
> Included is the devicetree support for the s3c24xx irq controller and
> basic support for smdk2416 boards, which can sucessfully boot.
> 
> 
> After the discussion with Thomas Abraham on v1 and staring to long at all
> of
> this, I'm not even sure if having the interrupt mapping in the binding
> is the correct way to go anymore.
> 
> The key positive aspect of this solution is, that after everything is
> running
> via dt all the SoC specific mapping tables in the driver can go away,
> cutting
> its length in half.
> 
> The other option would be as Thomas suggested to define specific irq-
> controller
> types (i.e. s3c2416-intc, s3c2443-intc, ... resulting in 16 types) and
> keep
> the mapping data in the code, as it is now.
> 
> So I would be very thankful for a bit of guidance on what is the better
> way.
> 
> 
> The series depends on the finalized s3c24xx irq rework, which probably
> won't
> make it into 3.9 and also the clocksource dt support by Tomasz Figa, which
> are not in any tree yet.
> 
> 
> Changes since v1:
> - adapt to changes in the underlying s3c24xx irq rework
>   = more shared init code
> - use irqchip infrastructure
> - limit number of possible irq-types to not encode implementation details
>   into the binding
> - include new samsung-clocksource
> 
> Heiko Stuebner (3):
>   ARM: S3C24XX: move irq driver to drivers/irqchip
>   irqchip: irq-s3c24xx: add devicetree support
>   ARM: S3C24XX: Add devicetree support and dt-board file for s3c2416 SoCs
> 
>  .../interrupt-controller/samsung,s3c24xx-irq.txt   |   53 ++++++
>  arch/arm/boot/dts/Makefile                         |    1 +
>  arch/arm/boot/dts/s3c2416-smdk2416.dts             |   79 ++++++++
>  arch/arm/boot/dts/s3c2416.dtsi                     |  193 ++++++++++++++++++++
>  arch/arm/boot/dts/s3c24xx.dtsi                     |  165 +++++++++++++++++
>  arch/arm/mach-s3c24xx/Kconfig                      |   10 +
>  arch/arm/mach-s3c24xx/Makefile                     |    3 +-
>  arch/arm/mach-s3c24xx/mach-s3c2416-dt.c            |   91 +++++++++
>  drivers/irqchip/Makefile                           |    1 +
>  .../irq.c => drivers/irqchip/irq-s3c24xx.c         |  128 +++++++++++++
>  10 files changed, 723 insertions(+), 1 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-
> controller/samsung,s3c24xx-irq.txt
>  create mode 100644 arch/arm/boot/dts/s3c2416-smdk2416.dts
>  create mode 100644 arch/arm/boot/dts/s3c2416.dtsi
>  create mode 100644 arch/arm/boot/dts/s3c24xx.dtsi
>  create mode 100644 arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
>  rename arch/arm/mach-s3c24xx/irq.c => drivers/irqchip/irq-s3c24xx.c (92%)
> 
> --
> 1.7.2.3

Basically, looks good to me and thanks for your effort.

BTW, if you don't mind, would be better to send to upstream next time. Because I need to consider other s3c24xx SoCs for DT...

Thanks.

- Kukjin