[PATCH 4/9] ARM: ux500: Move Snowball's thermal DT node into existing PRCMU one
Lee Jones
lee.jones at linaro.org
Tue Apr 2 09:21:51 EDT 2013
When the thermal DT node was inserted a new PRCMU node was created;
however, one already exists in the Snowball DTS file. Here we
amalgamate the two into a single consolidated node.
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
arch/arm/boot/dts/snowball.dts | 53 +++++++++++++++++++---------------------
1 file changed, 25 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index d3ec32f..cc99447 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -99,33 +99,6 @@
status = "okay";
};
- prcmu at 80157000 {
- thermal at 801573c0 {
- num-trips = <4>;
-
- trip0-temp = <70000>;
- trip0-type = "active";
- trip0-cdev-num = <1>;
- trip0-cdev-name0 = "thermal-cpufreq-0";
-
- trip1-temp = <75000>;
- trip1-type = "active";
- trip1-cdev-num = <1>;
- trip1-cdev-name0 = "thermal-cpufreq-0";
-
- trip2-temp = <80000>;
- trip2-type = "active";
- trip2-cdev-num = <1>;
- trip2-cdev-name0 = "thermal-cpufreq-0";
-
- trip3-temp = <85000>;
- trip3-type = "critical";
- trip3-cdev-num = <0>;
-
- status = "okay";
- };
- };
-
external-bus at 50000000 {
status = "okay";
@@ -296,7 +269,31 @@
db8500_esram34_ret_reg: db8500_esram34_ret {
regulator-name = "db8500-esram34-ret";
};
- };
+
+ thermal at 801573c0 {
+ num-trips = <4>;
+
+ trip0-temp = <70000>;
+ trip0-type = "active";
+ trip0-cdev-num = <1>;
+ trip0-cdev-name0 = "thermal-cpufreq-0";
+
+ trip1-temp = <75000>;
+ trip1-type = "active";
+ trip1-cdev-num = <1>;
+ trip1-cdev-name0 = "thermal-cpufreq-0";
+
+ trip2-temp = <80000>;
+ trip2-type = "active";
+ trip2-cdev-num = <1>;
+ trip2-cdev-name0 = "thermal-cpufreq-0";
+
+ trip3-temp = <85000>;
+ trip3-type = "critical";
+ trip3-cdev-num = <0>;
+
+ status = "okay";
+ };
ab8500 {
ab8500-regulators {
--
1.7.10.4
More information about the linux-arm-kernel
mailing list