[PATCH v3 1/3] USB: chipidea: add imx usbmisc support
Richard Zhao
richard.zhao at freescale.com
Mon Jul 30 05:39:56 EDT 2012
On Mon, Jul 30, 2012 at 11:32:44AM +0200, Sascha Hauer wrote:
> On Thu, Jul 26, 2012 at 06:35:14PM +0800, Richard Zhao wrote:
> > i.MX usb controllers shares non-core registers, which may include
> > SoC specific controls. We take it as a usbmisc device and usbmisc
> > driver set operations needed by ci13xxx_imx driver.
> >
> > For example, Sabrelite board has bad over-current design, we can
> > usbmisc to disable over-current detect.
> >
> > Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
> > ---
> > .../devicetree/bindings/usb/ci13xxx-imx.txt | 2 +
> > .../devicetree/bindings/usb/usbmisc-imx.txt | 12 ++
> > drivers/usb/chipidea/Makefile | 3 +-
> > drivers/usb/chipidea/ci13xxx_imx.c | 72 ++++++++-
> > drivers/usb/chipidea/usbmisc_imx6q.c | 155 ++++++++++++++++++++
> > 5 files changed, 242 insertions(+), 2 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> > create mode 100644 drivers/usb/chipidea/usbmisc_imx6q.c
> >
> > diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> > index 2c29041..06105ce 100644
> > --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> > +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> > @@ -8,6 +8,7 @@ Required properties:
> > Optional properties:
> > - fsl,usbphy: phandler of usb phy that connects to the only one port
> > - vbus-supply: regulator for vbus
> > +- disable-over-current: disable over current detect
> >
> > Examples:
> > usb at 02184000 { /* USB OTG */
> > @@ -15,4 +16,5 @@ usb at 02184000 { /* USB OTG */
> > reg = <0x02184000 0x200>;
> > interrupts = <0 43 0x04>;
> > fsl,usbphy = <&usbphy1>;
> > + disable-over-current;
> > };
> > diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> > new file mode 100644
> > index 0000000..4fa500d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> > @@ -0,0 +1,12 @@
> > +* Freescale i.MX non-core registers
> > +
> > +Required properties:
> > +- compatible: Should be one of below:
> > + "fsl,imx6q-usbmisc" for imx6q
> > +- reg: Should contain registers location and length
> > +
> > +Examples:
> > +usbmisc at 02184800 {
> > + compatible = "fsl,imx6q-usbmisc";
> > + reg = <0x02184800 0x200>;
> > +};
> > diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> > index 5c66d9c..36f94c9d 100644
> > --- a/drivers/usb/chipidea/Makefile
> > +++ b/drivers/usb/chipidea/Makefile
> > @@ -15,5 +15,6 @@ ifneq ($(CONFIG_PCI),)
> > endif
> >
> > ifneq ($(CONFIG_OF_DEVICE),)
> > - obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o
> > + obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx-imx.o
> > + ci13xxx-imx-y := ci13xxx_imx.o usbmisc_imx6q.o
> > endif
> > diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
> > index ef60d06..d178889 100644
> > --- a/drivers/usb/chipidea/ci13xxx_imx.c
> > +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> > @@ -22,6 +22,7 @@
> > #include <linux/regulator/consumer.h>
> >
> > #include "ci.h"
> > +#include "ci13xxx_imx.h"
> >
> > #define pdev_to_phy(pdev) \
> > ((struct usb_phy *)platform_get_drvdata(pdev))
> > @@ -34,6 +35,48 @@ struct ci13xxx_imx_data {
> > struct regulator *reg_vbus;
> > };
> >
> > +static const struct usbmisc_ops *usbmisc_ops;
> > +
> > +/* Common functions shared by usbmisc drivers */
> > +
> > +int usbmisc_set_ops(const struct usbmisc_ops *ops)
> > +{
> > + if (usbmisc_ops)
> > + return -EBUSY;
> > +
> > + usbmisc_ops = ops;
> > +
> > + return 0;
> > +}
> > +
> > +void usbmisc_unset_ops(const struct usbmisc_ops *ops)
> > +{
> > + usbmisc_ops = NULL;
> > +}
> > +
> > +int usbmisc_get_init_data(struct device *dev, struct usbmisc_usb_device *usbdev)
> > +{
> > + struct device_node *np = dev->of_node;
> > + int id;
> > +
> > + usbdev->dev = dev;
> > +
> > + id = of_alias_get_id(np, "usb");
> > + if (id < 0) {
> > + dev_err(dev, "Failed to get alias id, errno %d\n", id);
> > + memset(usbdev, 0, sizeof(*usbdev));
> > + return id;
> > + }
> > + usbdev->index = id;
> > +
> > + if (of_find_property(np, "disable-over-current", NULL))
> > + usbdev->disable_oc = 1;
> > +
> > + return 0;
> > +}
> > +
> > +/* End of common functions shared by usbmisc drivers*/
> > +
> > static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = {
> > .name = "ci13xxx_imx",
> > .flags = CI13XXX_REQUIRE_TRANSCEIVER |
> > @@ -120,6 +163,16 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
> > *pdev->dev.dma_mask = DMA_BIT_MASK(32);
> > dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
> > }
> > +
> > + if (usbmisc_ops && usbmisc_ops->init) {
> > + ret = usbmisc_ops->init(&pdev->dev);
> > + if (ret) {
> > + dev_err(&pdev->dev,
> > + "usbmisc init failed, ret=%d\n", ret);
> > + return ret;
> > + }
> > + }
> > +
> > plat_ci = ci13xxx_add_device(&pdev->dev,
> > pdev->resource, pdev->num_resources,
> > &ci13xxx_imx_platdata);
> > @@ -189,7 +242,24 @@ static struct platform_driver ci13xxx_imx_driver = {
> > },
> > };
> >
> > -module_platform_driver(ci13xxx_imx_driver);
> > +static int __init ci13xxx_imx_drv_init(void)
> > +{
> > + int ret;
> > +
> > + ret = usbmisc_imx6q_drv_init();
> > + if (ret)
> > + return ret;
> > +
> > + return platform_driver_register(&ci13xxx_imx_driver);
> > +}
> > +module_init(ci13xxx_imx_drv_init);
>
> You do this change because you need to make sure that on i.MX6 the
> usbmisc device is probed before the chipidea core itself. This won't
> look very nice when the other i.MX SoCs get usbmisc support aswell.
>
> Wouldn't it be better to add a phandle which points from the chipidea
> cores to the usbmisc device? You could drop the alias then aswell.
>
> Like this:
>
> usbotg: usb at 02184000 {
> compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
> reg = <0x02184000 0x200>;
> interrupts = <0 43 0x04>;
> status = "disabled";
> usbmisc = <&usbmisc 0>
> };
>
> <&usbmisc 0> would then mean port 0 of the usbmisc device.
I didn't add the restriction that a usbmisc driver must have a usbmisc
device. I'm not sure whether all SoC and future SoC can be look as
a device.
Peter, do you have any idea?
Thanks
Richard
>
> If the usbmisc property exists, you can return -EPROBE_DEFER until it is
> available. If it doesn't exist, you just continue without usbmisc
> support (i.MX28)
>
> Sascha
>
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
More information about the linux-arm-kernel
mailing list