[PATCH v3 1/3] USB: chipidea: add imx usbmisc support
Sascha Hauer
s.hauer at pengutronix.de
Mon Jul 30 05:32:44 EDT 2012
On Thu, Jul 26, 2012 at 06:35:14PM +0800, Richard Zhao wrote:
> i.MX usb controllers shares non-core registers, which may include
> SoC specific controls. We take it as a usbmisc device and usbmisc
> driver set operations needed by ci13xxx_imx driver.
>
> For example, Sabrelite board has bad over-current design, we can
> usbmisc to disable over-current detect.
>
> Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
> ---
> .../devicetree/bindings/usb/ci13xxx-imx.txt | 2 +
> .../devicetree/bindings/usb/usbmisc-imx.txt | 12 ++
> drivers/usb/chipidea/Makefile | 3 +-
> drivers/usb/chipidea/ci13xxx_imx.c | 72 ++++++++-
> drivers/usb/chipidea/usbmisc_imx6q.c | 155 ++++++++++++++++++++
> 5 files changed, 242 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> create mode 100644 drivers/usb/chipidea/usbmisc_imx6q.c
>
> diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> index 2c29041..06105ce 100644
> --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> @@ -8,6 +8,7 @@ Required properties:
> Optional properties:
> - fsl,usbphy: phandler of usb phy that connects to the only one port
> - vbus-supply: regulator for vbus
> +- disable-over-current: disable over current detect
>
> Examples:
> usb at 02184000 { /* USB OTG */
> @@ -15,4 +16,5 @@ usb at 02184000 { /* USB OTG */
> reg = <0x02184000 0x200>;
> interrupts = <0 43 0x04>;
> fsl,usbphy = <&usbphy1>;
> + disable-over-current;
> };
> diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> new file mode 100644
> index 0000000..4fa500d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> @@ -0,0 +1,12 @@
> +* Freescale i.MX non-core registers
> +
> +Required properties:
> +- compatible: Should be one of below:
> + "fsl,imx6q-usbmisc" for imx6q
> +- reg: Should contain registers location and length
> +
> +Examples:
> +usbmisc at 02184800 {
> + compatible = "fsl,imx6q-usbmisc";
> + reg = <0x02184800 0x200>;
> +};
> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> index 5c66d9c..36f94c9d 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -15,5 +15,6 @@ ifneq ($(CONFIG_PCI),)
> endif
>
> ifneq ($(CONFIG_OF_DEVICE),)
> - obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o
> + obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx-imx.o
> + ci13xxx-imx-y := ci13xxx_imx.o usbmisc_imx6q.o
> endif
> diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
> index ef60d06..d178889 100644
> --- a/drivers/usb/chipidea/ci13xxx_imx.c
> +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> @@ -22,6 +22,7 @@
> #include <linux/regulator/consumer.h>
>
> #include "ci.h"
> +#include "ci13xxx_imx.h"
>
> #define pdev_to_phy(pdev) \
> ((struct usb_phy *)platform_get_drvdata(pdev))
> @@ -34,6 +35,48 @@ struct ci13xxx_imx_data {
> struct regulator *reg_vbus;
> };
>
> +static const struct usbmisc_ops *usbmisc_ops;
> +
> +/* Common functions shared by usbmisc drivers */
> +
> +int usbmisc_set_ops(const struct usbmisc_ops *ops)
> +{
> + if (usbmisc_ops)
> + return -EBUSY;
> +
> + usbmisc_ops = ops;
> +
> + return 0;
> +}
> +
> +void usbmisc_unset_ops(const struct usbmisc_ops *ops)
> +{
> + usbmisc_ops = NULL;
> +}
> +
> +int usbmisc_get_init_data(struct device *dev, struct usbmisc_usb_device *usbdev)
> +{
> + struct device_node *np = dev->of_node;
> + int id;
> +
> + usbdev->dev = dev;
> +
> + id = of_alias_get_id(np, "usb");
> + if (id < 0) {
> + dev_err(dev, "Failed to get alias id, errno %d\n", id);
> + memset(usbdev, 0, sizeof(*usbdev));
> + return id;
> + }
> + usbdev->index = id;
> +
> + if (of_find_property(np, "disable-over-current", NULL))
> + usbdev->disable_oc = 1;
> +
> + return 0;
> +}
> +
> +/* End of common functions shared by usbmisc drivers*/
> +
> static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = {
> .name = "ci13xxx_imx",
> .flags = CI13XXX_REQUIRE_TRANSCEIVER |
> @@ -120,6 +163,16 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
> *pdev->dev.dma_mask = DMA_BIT_MASK(32);
> dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
> }
> +
> + if (usbmisc_ops && usbmisc_ops->init) {
> + ret = usbmisc_ops->init(&pdev->dev);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "usbmisc init failed, ret=%d\n", ret);
> + return ret;
> + }
> + }
> +
> plat_ci = ci13xxx_add_device(&pdev->dev,
> pdev->resource, pdev->num_resources,
> &ci13xxx_imx_platdata);
> @@ -189,7 +242,24 @@ static struct platform_driver ci13xxx_imx_driver = {
> },
> };
>
> -module_platform_driver(ci13xxx_imx_driver);
> +static int __init ci13xxx_imx_drv_init(void)
> +{
> + int ret;
> +
> + ret = usbmisc_imx6q_drv_init();
> + if (ret)
> + return ret;
> +
> + return platform_driver_register(&ci13xxx_imx_driver);
> +}
> +module_init(ci13xxx_imx_drv_init);
You do this change because you need to make sure that on i.MX6 the
usbmisc device is probed before the chipidea core itself. This won't
look very nice when the other i.MX SoCs get usbmisc support aswell.
Wouldn't it be better to add a phandle which points from the chipidea
cores to the usbmisc device? You could drop the alias then aswell.
Like this:
usbotg: usb at 02184000 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 0x04>;
status = "disabled";
usbmisc = <&usbmisc 0>
};
<&usbmisc 0> would then mean port 0 of the usbmisc device.
If the usbmisc property exists, you can return -EPROBE_DEFER until it is
available. If it doesn't exist, you just continue without usbmisc
support (i.MX28)
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list