[PATCH v2 12/12] Crypto: CESA: Add support for DT based instantiation.
Florian Fainelli
florian at openwrt.org
Tue Jul 3 11:50:02 EDT 2012
Hello Andrew,
On Tuesday 03 July 2012 16:22:45 Andrew Lunn wrote:
> Based on work by Michael Waller and Jason Cooper.
>
> Added support for getting the interrupt number from DT.
>
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> ---
> .../devicetree/bindings/crypto/mv_cesa.txt | 18 ++++++++++++
> drivers/crypto/mv_cesa.c | 31
+++++++++++++++++---
> 2 files changed, 45 insertions(+), 4 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/crypto/mv_cesa.txt
>
> diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt
b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
> new file mode 100644
> index 0000000..f191122
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
> @@ -0,0 +1,18 @@
> +Marvell Cryptographic Engines And Security Accelerator
> +
> +Required properties:
> +- compatible : should be "mrvl,orion-crypto"
You mention "mvrl" here, but the rest of your series uses "marvell", and this
is also what you use as a match table later in the driver, this looks like a
left-over from your previous submission.
> +- reg : base physical address of the engine and length of memory mapped
> + region, followed by base physical address of sram and its memory
> + length
> +- interrupts : interrupt number
> +
> +Examples:
> +
> +crypto at f1030000 {
> + compatible = "mrvl,orion-crypto";
> + reg = <0xf1030000 0x10000
> + 0xf5000000 0x800>; /* sram */
> + interrupts = <22>;
> +};
> +
> diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
> index 1cc6b3f..964c4c5 100644
> --- a/drivers/crypto/mv_cesa.c
> +++ b/drivers/crypto/mv_cesa.c
> @@ -19,6 +19,9 @@
> #include <linux/clk.h>
> #include <crypto/internal/hash.h>
> #include <crypto/sha.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
>
> #include "mv_cesa.h"
>
> @@ -1005,7 +1008,11 @@ static int mv_probe(struct platform_device *pdev)
> return -EEXIST;
> }
>
> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> + if (pdev->dev.of_node)
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "regs");
> + else
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
If you add a reg-names property, which respects the ordering of the reg
property, you don't need this.
> if (!res)
> return -ENXIO;
>
> @@ -1021,7 +1028,11 @@ static int mv_probe(struct platform_device *pdev)
> goto err;
> }
>
> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sram");
> + if (pdev->dev.of_node)
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + else
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "sram");
ditto
> if (!res) {
> ret = -ENXIO;
> goto err_unmap_reg;
> @@ -1034,7 +1045,10 @@ static int mv_probe(struct platform_device *pdev)
> goto err_unmap_reg;
> }
>
> - irq = platform_get_irq(pdev, 0);
> + if (pdev->dev.of_node)
> + irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
> + else
> + irq = platform_get_irq(pdev, 0);
> if (irq < 0 || irq == NO_IRQ) {
> ret = irq;
> goto err_unmap_sram;
> @@ -1137,12 +1151,21 @@ static int mv_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id mv_cesa_of_match_table[] __devinitdata = {
> + { .compatible = "marvell,orion-crypto", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mv_cesa_of_match_table);
> +#endif
> +
> static struct platform_driver marvell_crypto = {
> .probe = mv_probe,
> - .remove = mv_remove,
> + .remove = __devexit_p(mv_remove),
> .driver = {
> .owner = THIS_MODULE,
> .name = "mv_crypto",
> + .of_match_table = of_match_ptr(mv_cesa_of_match_table),
> },
> };
> MODULE_ALIAS("platform:mv_crypto");
> --
> 1.7.10
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list