[PATCH v2 12/12] Crypto: CESA: Add support for DT based instantiation.
Andrew Lunn
andrew at lunn.ch
Tue Jul 3 10:22:45 EDT 2012
Based on work by Michael Waller and Jason Cooper.
Added support for getting the interrupt number from DT.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
.../devicetree/bindings/crypto/mv_cesa.txt | 18 ++++++++++++
drivers/crypto/mv_cesa.c | 31 +++++++++++++++++---
2 files changed, 45 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/crypto/mv_cesa.txt
diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
new file mode 100644
index 0000000..f191122
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
@@ -0,0 +1,18 @@
+Marvell Cryptographic Engines And Security Accelerator
+
+Required properties:
+- compatible : should be "mrvl,orion-crypto"
+- reg : base physical address of the engine and length of memory mapped
+ region, followed by base physical address of sram and its memory
+ length
+- interrupts : interrupt number
+
+Examples:
+
+crypto at f1030000 {
+ compatible = "mrvl,orion-crypto";
+ reg = <0xf1030000 0x10000
+ 0xf5000000 0x800>; /* sram */
+ interrupts = <22>;
+};
+
diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
index 1cc6b3f..964c4c5 100644
--- a/drivers/crypto/mv_cesa.c
+++ b/drivers/crypto/mv_cesa.c
@@ -19,6 +19,9 @@
#include <linux/clk.h>
#include <crypto/internal/hash.h>
#include <crypto/sha.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
#include "mv_cesa.h"
@@ -1005,7 +1008,11 @@ static int mv_probe(struct platform_device *pdev)
return -EEXIST;
}
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ if (pdev->dev.of_node)
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "regs");
+ else
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENXIO;
@@ -1021,7 +1028,11 @@ static int mv_probe(struct platform_device *pdev)
goto err;
}
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sram");
+ if (pdev->dev.of_node)
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ else
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "sram");
if (!res) {
ret = -ENXIO;
goto err_unmap_reg;
@@ -1034,7 +1045,10 @@ static int mv_probe(struct platform_device *pdev)
goto err_unmap_reg;
}
- irq = platform_get_irq(pdev, 0);
+ if (pdev->dev.of_node)
+ irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ else
+ irq = platform_get_irq(pdev, 0);
if (irq < 0 || irq == NO_IRQ) {
ret = irq;
goto err_unmap_sram;
@@ -1137,12 +1151,21 @@ static int mv_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id mv_cesa_of_match_table[] __devinitdata = {
+ { .compatible = "marvell,orion-crypto", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mv_cesa_of_match_table);
+#endif
+
static struct platform_driver marvell_crypto = {
.probe = mv_probe,
- .remove = mv_remove,
+ .remove = __devexit_p(mv_remove),
.driver = {
.owner = THIS_MODULE,
.name = "mv_crypto",
+ .of_match_table = of_match_ptr(mv_cesa_of_match_table),
},
};
MODULE_ALIAS("platform:mv_crypto");
--
1.7.10
More information about the linux-arm-kernel
mailing list