[PATCH 1/6] [ARM] pxa/balloon3: Machine file cleanup
Marek Vasut
marek.vasut at gmail.com
Fri Jul 30 02:34:23 EDT 2010
Logically separate parts of the file that are handled by one particular driver.
Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
---
arch/arm/mach-pxa/balloon3.c | 225 +++++++++++++++++++++++------------------
1 files changed, 126 insertions(+), 99 deletions(-)
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f3b5ace..8adb87a 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -51,87 +51,27 @@
#include "generic.h"
#include "devices.h"
-static unsigned long balloon3_irq_enabled;
-
-static unsigned long balloon3_features_present =
- (1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
- (1 << BALLOON3_FEATURE_AUDIO) |
- (1 << BALLOON3_FEATURE_TOPPOLY);
-
-int balloon3_has(enum balloon3_features feature)
-{
- return (balloon3_features_present & (1 << feature)) ? 1 : 0;
-}
-EXPORT_SYMBOL_GPL(balloon3_has);
-
-int __init parse_balloon3_features(char *arg)
-{
- if (!arg)
- return 0;
-
- return strict_strtoul(arg, 0, &balloon3_features_present);
-}
-early_param("balloon3_features", parse_balloon3_features);
-
-static void balloon3_mask_irq(unsigned int irq)
-{
- int balloon3_irq = (irq - BALLOON3_IRQ(0));
- balloon3_irq_enabled &= ~(1 << balloon3_irq);
- __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long balloon3_pin_config[] __initdata = {
+ /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
-static void balloon3_unmask_irq(unsigned int irq)
-{
- int balloon3_irq = (irq - BALLOON3_IRQ(0));
- balloon3_irq_enabled |= (1 << balloon3_irq);
- __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
+ /* Wakeup GPIO */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-static struct irq_chip balloon3_irq_chip = {
- .name = "FPGA",
- .ack = balloon3_mask_irq,
- .mask = balloon3_mask_irq,
- .unmask = balloon3_unmask_irq,
+ /* NAND & IDLE LED GPIOs */
+ GPIO9_GPIO,
+ GPIO10_GPIO,
};
-static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
- balloon3_irq_enabled;
-
- do {
- /* clear useless edge notification */
- if (desc->chip->ack)
- desc->chip->ack(BALLOON3_AUX_NIRQ);
- while (pending) {
- irq = BALLOON3_IRQ(0) + __ffs(pending);
- generic_handle_irq(irq);
- pending &= pending - 1;
- }
- pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
- balloon3_irq_enabled;
- } while (pending);
-}
-
-static void __init balloon3_init_irq(void)
-{
- int irq;
-
- pxa27x_init_irq();
- /* setup extra Balloon3 irqs */
- for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
- set_irq_chip(irq, &balloon3_irq_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
- set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
-
- pr_debug("%s: chained handler installed - irq %d automatically "
- "enabled\n", __func__, BALLOON3_AUX_NIRQ);
-}
-
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
static unsigned long balloon3_ac97_pin_config[] = {
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
@@ -140,19 +80,16 @@ static unsigned long balloon3_ac97_pin_config[] = {
GPIO113_AC97_nRESET,
};
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+
static void balloon3_backlight_power(int on)
{
pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
}
-static unsigned long balloon3_lcd_pin_config[] = {
- /* LCD - 16bpp Active TFT */
- GPIOxx_LCD_TFT_16BPP,
-
- GPIO99_GPIO, /* Backlight */
-};
-
static struct pxafb_mode_info balloon3_lcd_modes[] = {
{
.pixclock = 38000,
@@ -176,6 +113,9 @@ static struct pxafb_mach_info balloon3_pxafb_info = {
.pxafb_backlight_power = balloon3_backlight_power,
};
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
static unsigned long balloon3_mmc_pin_config[] = {
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
@@ -203,6 +143,9 @@ static struct pxamci_platform_data balloon3_mci_platform_data = {
.setpower = balloon3_mci_setpower,
};
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
static int balloon3_udc_is_connected(void)
{
pr_debug("%s: udc connected\n", __func__);
@@ -228,10 +171,16 @@ static struct pxa2xx_udc_mach_info balloon3_udc_info = {
.udc_command = balloon3_udc_command,
};
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
static struct pxaficp_platform_data balloon3_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
};
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
static unsigned long balloon3_ohci_pin_config[] = {
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
@@ -242,21 +191,9 @@ static struct pxaohci_platform_data balloon3_ohci_platform_data = {
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
-static unsigned long balloon3_pin_config[] __initdata = {
- /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_BTUART_RTS,
-
- /* Wakeup GPIO */
- GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
- /* NAND & IDLE LED GPIOs */
- GPIO9_GPIO,
- GPIO10_GPIO,
-};
-
+/******************************************************************************
+ * LED
+ ******************************************************************************/
static struct gpio_led balloon3_gpio_leds[] = {
{
.name = "balloon3:green:idle",
@@ -285,6 +222,96 @@ static struct platform_device balloon3led_device = {
},
};
+/******************************************************************************
+ * Compatibility: Parameter parsing
+ ******************************************************************************/
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+ (1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+ (1 << BALLOON3_FEATURE_AUDIO) |
+ (1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+ return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+ if (!arg)
+ return 0;
+
+ return strict_strtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+/******************************************************************************
+ * FPGA IRQ
+ ******************************************************************************/
+static void balloon3_mask_irq(unsigned int irq)
+{
+ int balloon3_irq = (irq - BALLOON3_IRQ(0));
+ balloon3_irq_enabled &= ~(1 << balloon3_irq);
+ __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(unsigned int irq)
+{
+ int balloon3_irq = (irq - BALLOON3_IRQ(0));
+ balloon3_irq_enabled |= (1 << balloon3_irq);
+ __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+ .name = "FPGA",
+ .ack = balloon3_mask_irq,
+ .mask = balloon3_mask_irq,
+ .unmask = balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+ balloon3_irq_enabled;
+
+ do {
+ /* clear useless edge notification */
+ if (desc->chip->ack)
+ desc->chip->ack(BALLOON3_AUX_NIRQ);
+ while (pending) {
+ irq = BALLOON3_IRQ(0) + __ffs(pending);
+ generic_handle_irq(irq);
+ pending &= pending - 1;
+ }
+ pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+ balloon3_irq_enabled;
+ } while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+ int irq;
+
+ pxa27x_init_irq();
+ /* setup extra Balloon3 irqs */
+ for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+ set_irq_chip(irq, &balloon3_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+ set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+ pr_debug("%s: chained handler installed - irq %d automatically "
+ "enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
static void __init balloon3_init(void)
{
pr_info("Initialising Balloon3\n");
--
1.7.1
More information about the linux-arm-kernel
mailing list