[PATCH 24/33] Removing dead ARCH_GUMSTIX_ORIG

[Jaya Kumar]

On Thu, Jul 1, 2010 at 12:27 PM, Eric Miao <eric.y.miao at gmail.com> wrote:
> On Thu, Jul 1, 2010 at 12:01 AM, Christoph Egger <siccegge at cs.fau.de> wrote:
>> ARCH_GUMSTIX_ORIG doesn't exist in Kconfig, therefore removing all
>> references for it from the source code.
>>
>> Signed-off-by: Christoph Egger <siccegge at cs.fau.de>
>
> Acked-by: Eric Miao <eric.y.miao at gmail.com>
>
> Cc'ed Jaya Kumar for additional thoughts.

Looks okay to me too. Thanks.

Acked-by: Jaya Kumar <jayakumar.lkml at gmail.com>

>
>> ---
>>  arch/arm/mach-pxa/include/mach/gumstix.h |   12 +-----------
>>  1 files changed, 1 insertions(+), 11 deletions(-)
>>
>> diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
>> index 06abd41..9b89868 100644
>> --- a/arch/arm/mach-pxa/include/mach/gumstix.h
>> +++ b/arch/arm/mach-pxa/include/mach/gumstix.h
>> @@ -14,25 +14,15 @@
>>
>>  /*
>>  GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
>> -interrupt signal for determining cable presence. On the original gumstix,
>> -this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
>> +interrupt signal for determining cable presence. On the gumstix F,
>>  this moves to GPIO17 and GPIO37. */
>>
>>  /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
>>  has detected a cable insertion; driven low otherwise. */
>>
>> -#ifdef CONFIG_ARCH_GUMSTIX_ORIG
>> -
>> -#define GPIO_GUMSTIX_USB_GPIOn         81
>> -#define GPIO_GUMSTIX_USB_GPIOx         83
>> -
>> -#else
>> -
>>  #define GPIO_GUMSTIX_USB_GPIOn         35
>>  #define GPIO_GUMSTIX_USB_GPIOx         41
>>
>> -#endif
>> -
>>  /* usb state change */
>>  #define GUMSTIX_USB_INTR_IRQ           IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
>>
>> --
>> 1.7.0.4
>>
>>
>