[PATCH 4/5 v4] msm: convert 7x30 to gpiomux.

Gregory Bean gbean at codeaurora.org
Sat Aug 28 13:05:47 EDT 2010


Change deprecated gpio_tlmm_config calls to gpiomux calls.

Signed-off-by: Gregory Bean <gbean at codeaurora.org>
---
 arch/arm/mach-msm/board-msm7x30.c |   20 --------------------
 arch/arm/mach-msm/gpiomux-7x30.c  |   21 ++++++++++++++++++++-
 2 files changed, 20 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index e329819..74abb74 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -39,22 +39,6 @@
 
 extern struct sys_timer msm_timer;
 
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
-static struct msm_gpio uart2_config_data[] = {
-	{ GPIO_CFG(49, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_RFR"},
-	{ GPIO_CFG(50, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_CTS"},
-	{ GPIO_CFG(51, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
-	{ GPIO_CFG(52, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
-};
-
-static void msm7x30_init_uart2(void)
-{
-	msm_gpios_request_enable(uart2_config_data,
-			ARRAY_SIZE(uart2_config_data));
-
-}
-#endif
-
 static struct platform_device *devices[] __initdata = {
 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
         &msm_device_uart2,
@@ -70,10 +54,6 @@ static void __init msm7x30_init_irq(void)
 static void __init msm7x30_init(void)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
-	msm7x30_init_uart2();
-#endif
-
 }
 
 static void __init msm7x30_map_io(void)
diff --git a/arch/arm/mach-msm/gpiomux-7x30.c b/arch/arm/mach-msm/gpiomux-7x30.c
index 7b380b3..6ce41c5 100644
--- a/arch/arm/mach-msm/gpiomux-7x30.c
+++ b/arch/arm/mach-msm/gpiomux-7x30.c
@@ -16,4 +16,23 @@
  */
 #include "gpiomux.h"
 
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {};
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+	[49] = { /* UART2 RFR */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+	[50] = { /* UART2 CTS */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+	[51] = { /* UART2 RX */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+	[52] = { /* UART2 TX */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+#endif
+};
-- 
1.7.0.4

/usr2/gbean/.signature.codeaurora.org



More information about the linux-arm-kernel mailing list