[PATCH 3/5 v4] msm: convert 8x50 to gpiomux.
Gregory Bean
gbean at codeaurora.org
Sat Aug 28 13:05:46 EDT 2010
Change the gpio-init code from deprecated gpio_tlmm_config
to the new gpiomux api.
Signed-off-by: Gregory Bean <gbean at codeaurora.org>
---
arch/arm/mach-msm/board-qsd8x50.c | 12 ------------
arch/arm/mach-msm/gpiomux-8x50.c | 11 ++++++++++-
2 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index e3cc807..fb0fe67 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -35,21 +35,10 @@
extern struct sys_timer msm_timer;
-static struct msm_gpio uart3_config_data[] = {
- { GPIO_CFG(86, 1, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
- { GPIO_CFG(87, 1, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
-};
-
static struct platform_device *devices[] __initdata = {
&msm_device_uart3,
};
-static void msm8x50_init_uart3(void)
-{
- msm_gpios_request_enable(uart3_config_data,
- ARRAY_SIZE(uart3_config_data));
-}
-
static void __init qsd8x50_map_io(void)
{
msm_map_qsd8x50_io();
@@ -64,7 +53,6 @@ static void __init qsd8x50_init_irq(void)
static void __init qsd8x50_init(void)
{
- msm8x50_init_uart3();
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c
index 7b380b3..4406e0f 100644
--- a/arch/arm/mach-msm/gpiomux-8x50.c
+++ b/arch/arm/mach-msm/gpiomux-8x50.c
@@ -16,4 +16,13 @@
*/
#include "gpiomux.h"
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {};
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+ [86] = { /* UART3 RX */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_1 | GPIOMUX_VALID,
+ },
+ [87] = { /* UART3 TX */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_1 | GPIOMUX_VALID,
+ },
+};
--
1.7.0.4
/usr2/gbean/.signature.codeaurora.org
More information about the linux-arm-kernel
mailing list