[PATCH 1/3 v2] [ARM] pxa3xx: Add U2D controller and ULPI driver
Eric Miao
eric.y.miao at gmail.com
Thu Aug 5 01:47:41 EDT 2010
On Tue, Jul 27, 2010 at 8:06 PM, Igor Grinberg <grinberg at compulab.co.il> wrote:
> USB2.0 Device Controller (U2DC) which is found in Marvell PXA3xx.
> U2DC supports both High and Full speed modes.
> PXA320 and PXA300 U2DC supports only UTMI interface.
> PXA310 U2DC supports only ULPI interface and has the OTG capability.
>
> U2D Controller ULPI driver introduced in this patch supports only the
> PXA310 USB Host via the ULPI.
>
> Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
> Signed-off-by: Mike Rapoport <mike at compulab.co.il>
It's generally OK, but I have the building errors below:
CC arch/arm/mach-pxa/devices.o
In file included from
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h:15,
from
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/devices.c:9:
/home/ycmiao/kernel/linux-2.6/include/linux/usb/ulpi.h:145: warning:
'struct otg_io_access_ops' declared inside parameter list
/home/ycmiao/kernel/linux-2.6/include/linux/usb/ulpi.h:145: warning:
its scope is only this definition or declaration, which is probably
not what you want
In file included from
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/devices.c:9:
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h:29:
warning: 'struct usb_bus' declared inside parameter list
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h:31:
warning: 'struct usb_bus' declared inside parameter list
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/pxa3xx-ulpi.c: In
function 'pxa310_start_otg_hc':
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/pxa3xx-ulpi.c:176:
error: 'ULPI_IC_6PIN_SERIAL' undeclared (first use in this function)
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/pxa3xx-ulpi.c:176:
error: (Each undeclared identifier is reported only once
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/pxa3xx-ulpi.c:176:
error: for each function it appears in.)
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/pxa3xx-ulpi.c:178:
error: 'ULPI_IC_3PIN_SERIAL' undeclared (first use in this function)
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/pxa3xx-ulpi.c: In
function 'pxa310_otg_init':
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/pxa3xx-ulpi.c:213:
error: 'ULPI_OTG_DRVVBUS' undeclared (first use in this function)
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/pxa3xx-ulpi.c:217:
error: 'ULPI_IC_6PIN_SERIAL' undeclared (first use in this function)
/home/ycmiao/kernel/linux-2.6/arch/arm/mach-pxa/pxa3xx-ulpi.c:219:
error: 'ULPI_IC_3PIN_SERIAL' undeclared (first use in this function)
make[2]: *** [arch/arm/mach-pxa/pxa3xx-ulpi.o] Error 1
make[1]: *** [arch/arm/mach-pxa] Error 2
make[1]: *** Waiting for unfinished jobs....
> ---
> arch/arm/mach-pxa/Kconfig | 4 +
> arch/arm/mach-pxa/Makefile | 2 +-
> arch/arm/mach-pxa/devices.c | 28 ++
> arch/arm/mach-pxa/devices.h | 1 +
> arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h | 35 +++
> arch/arm/mach-pxa/pxa3xx-ulpi.c | 392 +++++++++++++++++++++++++++
> arch/arm/mach-pxa/pxa3xx.c | 2 +-
> 7 files changed, 462 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
> create mode 100644 arch/arm/mach-pxa/pxa3xx-ulpi.c
>
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index 3b51741..e96fa2a 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -609,6 +609,7 @@ config CPU_PXA300
> config CPU_PXA310
> bool
> select CPU_PXA300
> + select PXA310_ULPI if USB_ULPI
> help
> PXA310 (codename Monahans-LV)
>
> @@ -674,4 +675,7 @@ config PXA_HAVE_BOARD_IRQS
> config PXA_HAVE_ISA_IRQS
> bool
>
> +config PXA310_ULPI
> + bool
> +
> endif
> diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
> index b8f1f4b..27f9ee7 100644
> --- a/arch/arm/mach-pxa/Makefile
> +++ b/arch/arm/mach-pxa/Makefile
> @@ -18,7 +18,7 @@ endif
> # SoC-specific code
> obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
> obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
> -obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
> +obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
> obj-$(CONFIG_CPU_PXA300) += pxa300.o
> obj-$(CONFIG_CPU_PXA320) += pxa320.o
> obj-$(CONFIG_CPU_PXA930) += pxa930.o
> diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
> index 8e10db1..cf5222e 100644
> --- a/arch/arm/mach-pxa/devices.c
> +++ b/arch/arm/mach-pxa/devices.c
> @@ -5,6 +5,7 @@
> #include <linux/dma-mapping.h>
>
> #include <mach/udc.h>
> +#include <mach/pxa3xx-u2d.h>
> #include <mach/pxafb.h>
> #include <mach/mmc.h>
> #include <mach/irda.h>
> @@ -120,6 +121,33 @@ struct platform_device pxa27x_device_udc = {
> }
> };
>
> +#ifdef CONFIG_PXA3xx
> +static struct resource pxa3xx_u2d_resources[] = {
> + [0] = {
> + .start = 0x54100000,
> + .end = 0x54100fff,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = IRQ_USB2,
> + .end = IRQ_USB2,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +struct platform_device pxa3xx_device_u2d = {
> + .name = "pxa3xx-u2d",
> + .id = -1,
> + .resource = pxa3xx_u2d_resources,
> + .num_resources = ARRAY_SIZE(pxa3xx_u2d_resources),
> +};
> +
> +void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
> +{
> + pxa_register_device(&pxa3xx_device_u2d, info);
> +}
> +#endif /* CONFIG_PXA3xx */
> +
> static struct resource pxafb_resources[] = {
> [0] = {
> .start = 0x44000000,
> diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
> index 93817d9..631935c 100644
> --- a/arch/arm/mach-pxa/devices.h
> +++ b/arch/arm/mach-pxa/devices.h
> @@ -3,6 +3,7 @@ extern struct platform_device pxa3xx_device_mci2;
> extern struct platform_device pxa3xx_device_mci3;
> extern struct platform_device pxa25x_device_udc;
> extern struct platform_device pxa27x_device_udc;
> +extern struct platform_device pxa3xx_device_u2d;
> extern struct platform_device pxa_device_fb;
> extern struct platform_device pxa_device_ffuart;
> extern struct platform_device pxa_device_btuart;
> diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
> new file mode 100644
> index 0000000..9d82cb6
> --- /dev/null
> +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
> @@ -0,0 +1,35 @@
> +/*
> + * PXA3xx U2D header
> + *
> + * Copyright (C) 2010 CompuLab Ltd.
> + *
> + * Igor Grinberg <grinberg at compulab.co.il>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#ifndef __PXA310_U2D__
> +#define __PXA310_U2D__
> +
> +#include <linux/usb/ulpi.h>
> +
> +struct pxa3xx_u2d_platform_data {
> +
> +#define ULPI_SER_6PIN (1 << 0)
> +#define ULPI_SER_3PIN (1 << 1)
> + unsigned int ulpi_mode;
> +
> + int (*init)(struct device *);
> + void (*exit)(struct device *);
> +};
> +
> +
> +/* Start PXA3xx U2D host */
> +int pxa3xx_u2d_start_hc(struct usb_bus *host);
> +/* Stop PXA3xx U2D host */
> +void pxa3xx_u2d_stop_hc(struct usb_bus *host);
> +
> +extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
> +
> +#endif /* __PXA310_U2D__ */
> diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
> new file mode 100644
> index 0000000..e57439e
> --- /dev/null
> +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
> @@ -0,0 +1,392 @@
> +/*
> + * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
> + *
> + * code specific to pxa3xx aka Monahans
> + *
> + * Copyright (C) 2010 CompuLab Ltd.
> + *
> + * 2010-13-07: Igor Grinberg <grinberg at compulab.co.il>
> + * initial version: pxa310 USB Host mode support
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/delay.h>
> +#include <linux/clk.h>
> +#include <linux/usb.h>
> +#include <linux/usb/otg.h>
> +
> +#include <mach/hardware.h>
> +#include <mach/regs-u2d.h>
> +#include <mach/pxa3xx-u2d.h>
> +
> +struct pxa3xx_u2d_ulpi {
> + struct clk *clk;
> + void __iomem *mmio_base;
> +
> + struct otg_transceiver *otg;
> + unsigned int ulpi_mode;
> +};
> +
> +static struct pxa3xx_u2d_ulpi *u2d;
> +
> +static inline u32 u2d_readl(u32 reg)
> +{
> + return __raw_readl(u2d->mmio_base + reg);
> +}
> +
> +static inline void u2d_writel(u32 reg, u32 val)
> +{
> + __raw_writel(val, u2d->mmio_base + reg);
> +}
> +
> +#if defined(CONFIG_PXA310_ULPI)
> +enum u2d_ulpi_phy_mode {
> + SYNCH = 0,
> + CARKIT = (1 << 0),
> + SER_3PIN = (1 << 1),
> + SER_6PIN = (1 << 2),
> + LOWPOWER = (1 << 3),
> +};
> +
> +static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
> +{
> + return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
> +}
> +
> +static int pxa310_ulpi_poll(void)
> +{
> + int timeout = 50000;
> +
> + while (timeout--) {
> + if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
> + return 0;
> +
> + cpu_relax();
> + }
> +
> + pr_warning("%s: ULPI access timed out!\n", __func__);
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
> +{
> + int err;
> +
> + if (pxa310_ulpi_get_phymode() != SYNCH) {
> + pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
> + return -EBUSY;
> + }
> +
> + u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
> + msleep(5);
> +
> + err = pxa310_ulpi_poll();
> + if (err)
> + return err;
> +
> + return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
> +}
> +
> +static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
> +{
> + if (pxa310_ulpi_get_phymode() != SYNCH) {
> + pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
> + return -EBUSY;
> + }
> +
> + u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
> + msleep(5);
> +
> + return pxa310_ulpi_poll();
> +}
> +
> +struct otg_io_access_ops pxa310_ulpi_access_ops = {
> + .read = pxa310_ulpi_read,
> + .write = pxa310_ulpi_write,
> +};
> +
> +static void pxa310_otg_transceiver_rtsm(void)
> +{
> + u32 u2dotgcr;
> +
> + /* put PHY to sync mode */
> + u2dotgcr = u2d_readl(U2DOTGCR);
> + u2dotgcr |= U2DOTGCR_RTSM | U2DOTGCR_UTMID;
> + u2d_writel(U2DOTGCR, u2dotgcr);
> + msleep(10);
> +
> + /* setup OTG sync mode */
> + u2dotgcr = u2d_readl(U2DOTGCR);
> + u2dotgcr |= U2DOTGCR_ULAF;
> + u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
> + u2d_writel(U2DOTGCR, u2dotgcr);
> +}
> +
> +static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
> +{
> + int err;
> +
> + pxa310_otg_transceiver_rtsm();
> +
> + err = otg_init(u2d->otg);
> + if (err) {
> + pr_err("OTG transceiver init failed");
> + return err;
> + }
> +
> + err = otg_set_vbus(u2d->otg, 1);
> + if (err) {
> + pr_err("OTG transceiver VBUS set failed");
> + return err;
> + }
> +
> + err = otg_set_host(u2d->otg, host);
> + if (err)
> + pr_err("OTG transceiver Host mode set failed");
> +
> + return err;
> +}
> +
> +static int pxa310_start_otg_hc(struct usb_bus *host)
> +{
> + u32 u2dotgcr;
> + int err;
> +
> + /* disable USB device controller */
> + u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
> + u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
> + u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
> +
> + err = pxa310_start_otg_host_transcvr(host);
> + if (err)
> + return err;
> +
> + /* set xceiver mode */
> + if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
> + u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
> + else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
> + u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
> +
> + /* start OTG host controller */
> + u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
> + u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
> +
> + return 0;
> +}
> +
> +static void pxa310_stop_otg_hc(void)
> +{
> + pxa310_otg_transceiver_rtsm();
> +
> + otg_set_host(u2d->otg, NULL);
> + otg_set_vbus(u2d->otg, 0);
> + otg_shutdown(u2d->otg);
> +}
> +
> +static void pxa310_u2d_setup_otg_hc(void)
> +{
> + u32 u2dotgcr;
> +
> + u2dotgcr = u2d_readl(U2DOTGCR);
> + u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
> + u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
> + u2d_writel(U2DOTGCR, u2dotgcr);
> + msleep(5);
> + u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
> + msleep(5);
> + u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
> +}
> +
> +static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
> +{
> + unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
> +
> + if (pdata) {
> + if (pdata->ulpi_mode & ULPI_SER_6PIN)
> + ulpi_mode |= ULPI_IC_6PIN_SERIAL;
> + else if (pdata->ulpi_mode & ULPI_SER_3PIN)
> + ulpi_mode |= ULPI_IC_3PIN_SERIAL;
> + }
> +
> + u2d->ulpi_mode = ulpi_mode;
> +
> + u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
> + if (!u2d->otg)
> + return -ENOMEM;
> +
> + u2d->otg->io_priv = u2d->mmio_base;
> +
> + return 0;
> +}
> +
> +static void pxa310_otg_exit(void)
> +{
> + kfree(u2d->otg);
> +}
> +#else
> +static inline void pxa310_u2d_setup_otg_hc(void) {}
> +static inline int pxa310_start_otg_hc(struct usb_bus *host)
> +{
> + return 0;
> +}
> +static inline void pxa310_stop_otg_hc(void) {}
> +static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
> +{
> + return 0;
> +}
> +static inline void pxa310_otg_exit(void) {}
> +#endif /* CONFIG_PXA310_ULPI */
> +
> +int pxa3xx_u2d_start_hc(struct usb_bus *host)
> +{
> + int err = 0;
> +
> + clk_enable(u2d->clk);
> +
> + if (cpu_is_pxa310()) {
> + pxa310_u2d_setup_otg_hc();
> + err = pxa310_start_otg_hc(host);
> + }
> +
> + return err;
> +}
> +
> +void pxa3xx_u2d_stop_hc(struct usb_bus *host)
> +{
> + if (cpu_is_pxa310())
> + pxa310_stop_otg_hc();
> +
> + clk_disable(u2d->clk);
> +}
> +
> +static int pxa3xx_u2d_probe(struct platform_device *pdev)
> +{
> + struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
> + struct resource *r;
> + int err;
> +
> + u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL);
> + if (!u2d) {
> + dev_err(&pdev->dev, "failed to allocate memory\n");
> + return -ENOMEM;
> + }
> +
> + u2d->clk = clk_get(&pdev->dev, NULL);
> + if (IS_ERR(u2d->clk)) {
> + dev_err(&pdev->dev, "failed to get u2d clock\n");
> + err = PTR_ERR(u2d->clk);
> + goto err_free_mem;
> + }
> +
> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!r) {
> + dev_err(&pdev->dev, "no IO memory resource defined\n");
> + err = -ENODEV;
> + goto err_put_clk;
> + }
> +
> + r = request_mem_region(r->start, resource_size(r), pdev->name);
> + if (!r) {
> + dev_err(&pdev->dev, "failed to request memory resource\n");
> + err = -EBUSY;
> + goto err_put_clk;
> + }
> +
> + u2d->mmio_base = ioremap(r->start, resource_size(r));
> + if (!u2d->mmio_base) {
> + dev_err(&pdev->dev, "ioremap() failed\n");
> + err = -ENODEV;
> + goto err_free_res;
> + }
> +
> + if (pdata->init) {
> + err = pdata->init(&pdev->dev);
> + if (err)
> + goto err_free_io;
> + }
> +
> + /* Only PXA310 U2D has OTG functionality */
> + if (cpu_is_pxa310()) {
> + err = pxa310_otg_init(pdata);
> + if (err)
> + goto err_free_plat;
> + }
> +
> + platform_set_drvdata(pdev, &u2d);
> +
> + return 0;
> +
> +err_free_plat:
> + if (pdata->exit)
> + pdata->exit(&pdev->dev);
> +err_free_io:
> + iounmap(u2d->mmio_base);
> +err_free_res:
> + release_mem_region(r->start, resource_size(r));
> +err_put_clk:
> + clk_put(u2d->clk);
> +err_free_mem:
> + kfree(u2d);
> + return err;
> +}
> +
> +static int pxa3xx_u2d_remove(struct platform_device *pdev)
> +{
> + struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
> + struct resource *r;
> +
> + if (cpu_is_pxa310()) {
> + pxa310_stop_otg_hc();
> + pxa310_otg_exit();
> + }
> +
> + if (pdata->exit)
> + pdata->exit(&pdev->dev);
> +
> + platform_set_drvdata(pdev, NULL);
> + iounmap(u2d->mmio_base);
> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + release_mem_region(r->start, resource_size(r));
> +
> + clk_put(u2d->clk);
> +
> + kfree(u2d);
> +
> + return 0;
> +}
> +
> +static struct platform_driver pxa3xx_u2d_ulpi_driver = {
> + .driver = {
> + .name = "pxa3xx-u2d",
> + .owner = THIS_MODULE,
> + },
> + .probe = pxa3xx_u2d_probe,
> + .remove = pxa3xx_u2d_remove,
> +};
> +
> +static int pxa3xx_u2d_ulpi_init(void)
> +{
> + return platform_driver_register(&pxa3xx_u2d_ulpi_driver);
> +}
> +module_init(pxa3xx_u2d_ulpi_init);
> +
> +static void __exit pxa3xx_u2d_ulpi_exit(void)
> +{
> + platform_driver_unregister(&pxa3xx_u2d_ulpi_driver);
> +}
> +module_exit(pxa3xx_u2d_ulpi_exit);
> +
> +MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
> +MODULE_AUTHOR("Igor Grinberg");
> +MODULE_LICENSE("GPL v2");
> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
> index f544e58..9a707db 100644
> --- a/arch/arm/mach-pxa/pxa3xx.c
> +++ b/arch/arm/mach-pxa/pxa3xx.c
> @@ -265,7 +265,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
> INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
> INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
> INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
> - INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"),
> + INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
> INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
> INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
> INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
> --
> 1.7.1
>
>
More information about the linux-arm-kernel
mailing list