[at91sam9g45] touch screen not detected by Angstrom Linux
Yegor Yefremov
yegor_sub1 at visionsystems.de
Wed Sep 30 05:06:07 EDT 2009
Hello Nicolas,
I could successfully apply your touch screen drivers to 2.6.32-rc2:
2.6.30-at91-exp-0045-input-atmel_tsadcc-touchscreen-use-platform-paramet.patch
2.6.30-at91-exp-0046-at91-input-platform-parameters-for-atmel_tsadcc-in.patch
2.6.30-at91-exp-0047-at91-input-touchscreen-support-for-at91sam9g45ekes.patch
Here dmesg output for 2.6.32-rc2:
atmel_tsadcc atmel_tsadcc: Master clock is set at: 133333333 Hz
atmel_tsadcc atmel_tsadcc: Prescaler is set at: 221
input: atmel touch screen controller as /devices/platform/atmel_tsadcc/input/input1
Here dmesg output for 2.6.27 where touch screen is working under Angstrom Linux:
atmel_tsadcc atmel_tsadcc: Master clock is set at: 133333333 Hz
atmel_tsadcc atmel_tsadcc: Prescaler is set at: 221
input: atmel touch screen controller as /class/input/input1
The device is working if I read /dev/input/event1, but I'm not able to get it working under Angstrom Linux. Any ideas?
Regards,
Yegor
More information about the linux-arm-kernel
mailing list