[PATCH v3 3/3] arm64: dts: amlogic: meson-axg: Disable pcie_phy node by default

Jun Yan jerrysteve1101 at gmail.com
Mon Jun 22 23:05:14 PDT 2026


> Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
> 
> Pre-existing issues:
> - [High] Enabling `pcie_phy` on `meson-axg-s400.dts` is insufficient to support PCIe functionality because its hardware dependency `mipi_pcie_analog_dphy` remains disabled.
> --
> 
> commit cd94d06969e9f9a23ea319f406b8e86e8ed9ec44
> Author: Jun Yan <jerrysteve1101 at gmail.com>
> 
> arm64: dts: amlogic: meson-axg: Disable pcie_phy node by default
> 
> This patch disables the pcie_phy node by default in the meson-axg dtsi file
> to suppress deferred probe warnings on boards that do not use it. It then
> explicitly enables pcie_phy in the meson-axg-s400 board device tree to
> preserve its PCIe functionality.
> 
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> > index 285c6ac1dd613..7ba249cc3d569 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> 
> [ ... ]
> 
> > @@ -448,6 +448,10 @@ &pcieB {
> >  	status = "okay";
> >  };
> >  
> > +&pcie_phy {
> > +	status = "okay";
> > +};
> 
> [Severity: High]
> This is a pre-existing issue, but is it sufficient to only enable pcie_phy
> to restore PCIe functionality on the s400 board?
> 
> The pcie_phy node depends on the mipi_pcie_analog_dphy analog PHY via its
> phys property. Looking at meson-axg.dtsi, mipi_pcie_analog_dphy is disabled
> by default:
> 
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi:
>     mipi_pcie_analog_dphy: phy {
>         compatible = "amlogic,axg-mipi-pcie-analog-phy";
>         #phy-cells = <0>;
>         status = "disabled";
>     };
> 
> If the analog PHY is not also overridden to "okay" here in meson-axg-s400.dts,
> will the analog PHY driver fail to probe, causing devm_phy_get(dev, "analog")
> in the pcie_phy driver to continually return -EPROBE_DEFER?
> 

I'd like to add an additional patch to resolve this pre-existing issue reported by Sashiko.
Unfortunately I don't have S400 hardware available for testing.

> -- 
> Sashiko AI review · https://sashiko.dev/#/patchset/20260617082239.645562-1-jerrysteve1101@gmail.com?part=3



More information about the linux-amlogic mailing list