[PATCH v4 0/2] clk: amlogic: Add A9 AO clock controller

[Jerome Brunet]

On jeu. 18 juin 2026 at 17:49, Jian Hu via B4 Relay <devnull+jian.hu.amlogic.com at kernel.org> wrote:

> This series adds Amlogic A9 AO clock support, including dt-binding and AO clock driver.
>
> Signed-off-by: Jian Hu <jian.hu at amlogic.com>

A part from the 2 minor problems found by sashiko, This looks good.

> ---
> Changes in v4:
> - Drop CLK_IS_CRITICAL for ao_xtal_in clock.
> - Drop CLK_HW_INIT* and revert to explicit clock declarations.
> - Link to v3: https://lore.kernel.org/r/20260610-a9_aoclk-v3-0-b7592d6c31e2@amlogic.com
>
> Changes in v3:
> - Move COMPILE_TEST after 'depends on ARM64' reported by sashiko-bot.
> - Rename i2c3 to i3c reported by sashiko-bot.
> - Reword the comment describing ao_xtal_in's flags.
> - Use struct clk_init_data to describe ao_xtal_in's hw.init.
> - Link to v2: https://lore.kernel.org/r/20260603-a9_aoclk-v2-0-f47ea616ee78@amlogic.com
>
> Changes in v2:
> - Split the A9 clock driver and send the AO clock separately.
> - Rename aobus to soc.
> - Use CLK_HW_INIT_FW_NAME to describe clk_init_data.
> - Use CLK_HW_INIT_PARENTS_DATA to describe clk_init_data.
> - Use a9_ao prefix for MESON_COMP_SEL.
> - Correct duandiv name.
> - Fix pwm b reg.
> - Link to v1: https://lore.kernel.org/all/20260511-b4-a9_clk-v1-0-41cb4071b7c9@amlogic.com/
>
> ---
> Jian Hu (2):
>       dt-bindings: clock: Add Amlogic A9 AO clock controller
>       clk: amlogic: Add A9 AO clock controller driver
>
>  .../bindings/clock/amlogic,a9-aoclkc.yaml          |  76 ++++
>  drivers/clk/meson/Kconfig                          |  13 +
>  drivers/clk/meson/Makefile                         |   1 +
>  drivers/clk/meson/a9-aoclk.c                       | 488 +++++++++++++++++++++
>  include/dt-bindings/clock/amlogic,a9-aoclkc.h      |  76 ++++
>  5 files changed, 654 insertions(+)
> ---
> base-commit: ca89c88bcf69daca829044c638a8163d5ce47af0
> change-id: 20260603-a9_aoclk-bbf531badc63
>
> Best regards,

-- 
Jerome