[PATCH 10/19] arm64: dts: amlogic: A4: Add PLL controller node

[Chuan Liu via B4 Relay]

From: Chuan Liu <chuan.liu at amlogic.com>

Add the PLL controller node for A4 SoC family.

Signed-off-by: Chuan Liu <chuan.liu at amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index 75a87f093d8d..aca81e658654 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -7,6 +7,9 @@
 #include "amlogic-a4-reset.h"
 #include <dt-bindings/power/amlogic,a4-pwrc.h>
 #include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+#include <dt-bindings/clock/amlogic,a4-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,a4-scmi-clkc.h>
+
 / {
 	cpus {
 		#address-cells = <2>;
@@ -198,6 +201,16 @@ gpio_intc: interrupt-controller at 4080 {
 			<10 11 12 13 14 15 16 17 18 19 20 21>;
 	};
 
+	clkc_pll: clock-controller at 8000 {
+		compatible = "amlogic,a4-pll-clkc";
+		reg = <0x0 0x8000 0x0 0x1a4>;
+		#clock-cells = <1>;
+		clocks = <&xtal>,
+			 <&scmi_clk CLKID_FIXED_PLL>;
+		clock-names = "xtal",
+			      "fix";
+	};
+
 	ao_pinctrl: pinctrl at 8e700 {
 		compatible = "amlogic,pinctrl-a4";
 		#address-cells = <2>;

-- 
2.42.0