[DMARC error][DKIM error] [PATCH 3/4] arm64: dts: add support for A4 based Amlogic BA400

Xianwei Zhao xianwei.zhao at amlogic.com
Thu Mar 14 18:16:03 PDT 2024


Hi Neil,
   Thanks for your review.

On 2024/3/14 17:04, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
> 
> On 14/03/2024 06:19, Xianwei Zhao wrote:
>> Hi Dmitry,
>>     Thanks for your review.
>>
>> On 2024/3/13 17:53, Dmitry Rokosov wrote:
>>> [????????? ddrokosov at salutedevices.com ????????? 
>>> https://aka.ms/LearnAboutSenderIdentification?????????????]
>>>
>>> [ EXTERNAL EMAIL ]
>>>
>>> Hello Xianwei,
>>>
>>> On Tue, Mar 12, 2024 at 05:18:59PM +0800, Xianwei Zhao via B4 Relay 
>>> wrote:
>>>> From: Xianwei Zhao <xianwei.zhao at amlogic.com>
>>>>
>>>> Amlogic A4 is an application processor designed for smart audio
>>>> and IoT applications.
>>>>
>>>> Add basic support for the A4 based Amlogic BA400 board, which describes
>>>> the following components: CPU, GIC, IRQ, Timer and UART.
>>>> These are capable of booting up into the serial console.
>>>>
>>>> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
>>>> ---
>>>>   arch/arm64/boot/dts/amlogic/Makefile               |  1 +
>>>>   .../boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts   | 43 ++++++++++
>>>>   arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi        | 99 
>>>> ++++++++++++++++++++++
>>>>   3 files changed, 143 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile 
>>>> b/arch/arm64/boot/dts/amlogic/Makefile
>>>> index 1ab160bf928a..9a50ec11bb8d 100644
>>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>>> @@ -1,4 +1,5 @@
>>>>   # SPDX-License-Identifier: GPL-2.0
>>>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
>>>>   dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
>>>>   dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
>>>>   dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
>>>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts 
>>>> b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
>>>> new file mode 100644
>>>> index 000000000000..60f9f23858c6
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
>>>> @@ -0,0 +1,43 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>>> +/*
>>>> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include "amlogic-a4.dtsi"
>>>> +
>>>> +/ {
>>>> +     model = "Amlogic A113L2 ba400 Development Board";
>>>> +     compatible = "amlogic,ba400","amlogic,a4";
>>>> +     interrupt-parent = <&gic>;
>>>> +     #address-cells = <2>;
>>>> +     #size-cells = <2>;
>>>> +
>>>> +     aliases {
>>>> +             serial0 = &uart_b;
>>>> +     };
>>>> +
>>>> +     memory at 0 {
>>>> +             device_type = "memory";
>>>> +             reg = <0x0 0x0 0x0 0x40000000>;
>>>> +     };
>>>> +
>>>> +     reserved-memory {
>>>> +             #address-cells = <2>;
>>>> +             #size-cells = <2>;
>>>> +             ranges;
>>>> +
>>>> +             /* 52 MiB reserved for ARM Trusted Firmware */
>>>> +             secmon_reserved:linux,secmon {
>>>> +                     compatible = "shared-dma-pool";
>>>> +                     no-map;
>>>> +                     alignment = <0x0 0x400000>;
>>>> +                     reg = <0x0 0x05000000 0x0 0x3400000>;
>>>> +             };
>>>> +     };
>>>> +};
>>>> +
>>>> +&uart_b {
>>>> +     status = "okay";
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi 
>>>> b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
>>>> new file mode 100644
>>>> index 000000000000..7e8745010b52
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
>>>> @@ -0,0 +1,99 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>>> +/*
>>>> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +#include <dt-bindings/gpio/gpio.h>
>>>> +/ {
>>>> +     cpus {
>>>> +             #address-cells = <2>;
>>>> +             #size-cells = <0>;
>>>> +
>>>> +             cpu0: cpu at 0 {
>>>> +                     device_type = "cpu";
>>>> +                     compatible = "arm,cortex-a53";
>>>> +                     reg = <0x0 0x0>;
>>>> +                     enable-method = "psci";
>>>> +             };
>>>> +
>>>> +             cpu1: cpu at 1 {
>>>> +                     device_type = "cpu";
>>>> +                     compatible = "arm,cortex-a53";
>>>> +                     reg = <0x0 0x1>;
>>>> +                     enable-method = "psci";
>>>> +             };
>>>> +
>>>> +             cpu2: cpu at 2 {
>>>> +                     device_type = "cpu";
>>>> +                     compatible = "arm,cortex-a53";
>>>> +                     reg = <0x0 0x2>;
>>>> +                     enable-method = "psci";
>>>> +             };
>>>> +
>>>> +             cpu3: cpu at 3 {
>>>> +                     device_type = "cpu";
>>>> +                     compatible = "arm,cortex-a53";
>>>> +                     reg = <0x0 0x3>;
>>>> +                     enable-method = "psci";
>>>> +             };
>>>> +     };
>>>> +
>>>> +     timer {
>>>> +             compatible = "arm,armv8-timer";
>>>> +             interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | 
>>>> IRQ_TYPE_LEVEL_LOW)>,
>>>> +                          <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | 
>>>> IRQ_TYPE_LEVEL_LOW)>,
>>>> +                          <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | 
>>>> IRQ_TYPE_LEVEL_LOW)>,
>>>> +                          <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | 
>>>> IRQ_TYPE_LEVEL_LOW)>;
>>>> +     };
>>>> +
>>>> +     psci {
>>>> +             compatible = "arm,psci-0.2";
>>>> +             method = "smc";
>>>> +     };
>>>> +
>>>> +     xtal: xtal-clk {
>>>> +             compatible = "fixed-clock";
>>>> +             clock-frequency = <24000000>;
>>>> +             clock-output-names = "xtal";
>>>> +             #clock-cells = <0>;
>>>> +     };
>>>> +
>>>> +     soc {
>>>> +             compatible = "simple-bus";
>>>> +             #address-cells = <2>;
>>>> +             #size-cells = <2>;
>>>> +             ranges;
>>>> +
>>>> +             gic: interrupt-controller at fff01000 {
>>>> +                     compatible = "arm,gic-400";
>>>> +                     #interrupt-cells = <3>;
>>>> +                     #address-cells = <0>;
>>>> +                     interrupt-controller;
>>>> +                     reg = <0x0 0xfff01000 0 0x1000>,
>>>> +                           <0x0 0xfff02000 0 0x2000>,
>>>> +                           <0x0 0xfff04000 0 0x2000>,
>>>> +                           <0x0 0xfff06000 0 0x2000>;
>>>> +                     interrupts = <GIC_PPI 9 
>>>> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>>>> +             };
>>>> +
>>>> +             apb at fe000000 {
>>>> +                     compatible = "simple-bus";
>>>> +                     reg = <0x0 0xfe000000 0x0 0x480000>;
>>>> +                     #address-cells = <2>;
>>>> +                     #size-cells = <2>;
>>>> +                     ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>>>> +
>>>> +                     uart_b: serial at 7a000 {
>>>> +                             compatible = "amlogic,meson-s4-uart",
>>>
>>> If I'm not wrong, you need to create dt-binding alias for meson-a4-uart
>>> and use it as 3rd compatible string.
> 
> Please add an A4 and A5 compatible using amlogic,meson-s4-uart as fallback,
> and drop the ao-uart since there's no more AO uart.
> 
> Follow how it was done for the T7 in 
> Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> 
> The amlogic,meson-s4-uart will provide an earlycon like ao-uart did.
> 
Will do.
> Thanks,
> Neil
> 
>>>
>> On UART module, A4 and A5 SoCs exactly the same as S4. There's no 
>> difference.
>>>> +                                          "amlogic,meson-ao-uart";
>>>> +                             reg = <0x0 0x7a000 0x0 0x18>;
>>>> +                             interrupts = <GIC_SPI 169 
>>>> IRQ_TYPE_EDGE_RISING>;
>>>> +                             clocks = <&xtal>, <&xtal>, <&xtal>;
>>>> +                             clock-names = "xtal", "pclk", "baud";
>>>> +                             status = "disabled";
>>>> +                     };
>>>> +             };
>>>> +     };
>>>> +};
>>>>
>>>> -- 
>>>> 2.37.1
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-amlogic mailing list
>>>> linux-amlogic at lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-amlogic
>>>
>>> -- 
>>> Thank you,
>>> Dmitry
> 



More information about the linux-amlogic mailing list