[DMARC error][DKIM error] [PATCH 3/4] arm64: dts: add support for A4 based Amlogic BA400
Neil Armstrong
neil.armstrong at linaro.org
Thu Mar 14 02:04:37 PDT 2024
On 14/03/2024 06:19, Xianwei Zhao wrote:
> Hi Dmitry,
> Thanks for your review.
>
> On 2024/3/13 17:53, Dmitry Rokosov wrote:
>> [????????? ddrokosov at salutedevices.com ????????? https://aka.ms/LearnAboutSenderIdentification?????????????]
>>
>> [ EXTERNAL EMAIL ]
>>
>> Hello Xianwei,
>>
>> On Tue, Mar 12, 2024 at 05:18:59PM +0800, Xianwei Zhao via B4 Relay wrote:
>>> From: Xianwei Zhao <xianwei.zhao at amlogic.com>
>>>
>>> Amlogic A4 is an application processor designed for smart audio
>>> and IoT applications.
>>>
>>> Add basic support for the A4 based Amlogic BA400 board, which describes
>>> the following components: CPU, GIC, IRQ, Timer and UART.
>>> These are capable of booting up into the serial console.
>>>
>>> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
>>> ---
>>> arch/arm64/boot/dts/amlogic/Makefile | 1 +
>>> .../boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts | 43 ++++++++++
>>> arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 99 ++++++++++++++++++++++
>>> 3 files changed, 143 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>>> index 1ab160bf928a..9a50ec11bb8d 100644
>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>> @@ -1,4 +1,5 @@
>>> # SPDX-License-Identifier: GPL-2.0
>>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
>>> dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
>>> dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
>>> dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
>>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
>>> new file mode 100644
>>> index 000000000000..60f9f23858c6
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
>>> @@ -0,0 +1,43 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +/*
>>> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "amlogic-a4.dtsi"
>>> +
>>> +/ {
>>> + model = "Amlogic A113L2 ba400 Development Board";
>>> + compatible = "amlogic,ba400","amlogic,a4";
>>> + interrupt-parent = <&gic>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> +
>>> + aliases {
>>> + serial0 = &uart_b;
>>> + };
>>> +
>>> + memory at 0 {
>>> + device_type = "memory";
>>> + reg = <0x0 0x0 0x0 0x40000000>;
>>> + };
>>> +
>>> + reserved-memory {
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> +
>>> + /* 52 MiB reserved for ARM Trusted Firmware */
>>> + secmon_reserved:linux,secmon {
>>> + compatible = "shared-dma-pool";
>>> + no-map;
>>> + alignment = <0x0 0x400000>;
>>> + reg = <0x0 0x05000000 0x0 0x3400000>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&uart_b {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
>>> new file mode 100644
>>> index 000000000000..7e8745010b52
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
>>> @@ -0,0 +1,99 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +/*
>>> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +/ {
>>> + cpus {
>>> + #address-cells = <2>;
>>> + #size-cells = <0>;
>>> +
>>> + cpu0: cpu at 0 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x0 0x0>;
>>> + enable-method = "psci";
>>> + };
>>> +
>>> + cpu1: cpu at 1 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x0 0x1>;
>>> + enable-method = "psci";
>>> + };
>>> +
>>> + cpu2: cpu at 2 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x0 0x2>;
>>> + enable-method = "psci";
>>> + };
>>> +
>>> + cpu3: cpu at 3 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x0 0x3>;
>>> + enable-method = "psci";
>>> + };
>>> + };
>>> +
>>> + timer {
>>> + compatible = "arm,armv8-timer";
>>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>>> + };
>>> +
>>> + psci {
>>> + compatible = "arm,psci-0.2";
>>> + method = "smc";
>>> + };
>>> +
>>> + xtal: xtal-clk {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <24000000>;
>>> + clock-output-names = "xtal";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + soc {
>>> + compatible = "simple-bus";
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> +
>>> + gic: interrupt-controller at fff01000 {
>>> + compatible = "arm,gic-400";
>>> + #interrupt-cells = <3>;
>>> + #address-cells = <0>;
>>> + interrupt-controller;
>>> + reg = <0x0 0xfff01000 0 0x1000>,
>>> + <0x0 0xfff02000 0 0x2000>,
>>> + <0x0 0xfff04000 0 0x2000>,
>>> + <0x0 0xfff06000 0 0x2000>;
>>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>>> + };
>>> +
>>> + apb at fe000000 {
>>> + compatible = "simple-bus";
>>> + reg = <0x0 0xfe000000 0x0 0x480000>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>>> +
>>> + uart_b: serial at 7a000 {
>>> + compatible = "amlogic,meson-s4-uart",
>>
>> If I'm not wrong, you need to create dt-binding alias for meson-a4-uart
>> and use it as 3rd compatible string.
Please add an A4 and A5 compatible using amlogic,meson-s4-uart as fallback,
and drop the ao-uart since there's no more AO uart.
Follow how it was done for the T7 in Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
The amlogic,meson-s4-uart will provide an earlycon like ao-uart did.
Thanks,
Neil
>>
> On UART module, A4 and A5 SoCs exactly the same as S4. There's no difference.
>>> + "amlogic,meson-ao-uart";
>>> + reg = <0x0 0x7a000 0x0 0x18>;
>>> + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
>>> + clocks = <&xtal>, <&xtal>, <&xtal>;
>>> + clock-names = "xtal", "pclk", "baud";
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +};
>>>
>>> --
>>> 2.37.1
>>>
>>>
>>> _______________________________________________
>>> linux-amlogic mailing list
>>> linux-amlogic at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-amlogic
>>
>> --
>> Thank you,
>> Dmitry
More information about the linux-amlogic
mailing list