[PATCH] spi: meson-spicc: convert comma to semicolon
neil.armstrong at linaro.org
neil.armstrong at linaro.org
Tue Jul 16 02:31:12 PDT 2024
On 16/07/2024 11:11, Chen Ni wrote:
> Replace a comma between expression statements by a semicolon.
>
> Fixes: 3e0cf4d3fc29 ("spi: meson-spicc: add a linear clock divider support")
> Signed-off-by: Chen Ni <nichen at iscas.ac.cn>
> ---
> drivers/spi/spi-meson-spicc.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
> index 8838a98b04c2..1d05590a7434 100644
> --- a/drivers/spi/spi-meson-spicc.c
> +++ b/drivers/spi/spi-meson-spicc.c
> @@ -655,8 +655,8 @@ static int meson_spicc_pow2_clk_init(struct meson_spicc_device *spicc)
> }
> init.num_parents = 1;
>
> - pow2_fixed_div->mult = 1,
> - pow2_fixed_div->div = 4,
> + pow2_fixed_div->mult = 1;
> + pow2_fixed_div->div = 4;
> pow2_fixed_div->hw.init = &init;
>
> clk = devm_clk_register(dev, &pow2_fixed_div->hw);
> @@ -674,9 +674,9 @@ static int meson_spicc_pow2_clk_init(struct meson_spicc_device *spicc)
> parent_data[0].hw = &pow2_fixed_div->hw;
> init.num_parents = 1;
>
> - spicc->pow2_div.shift = 16,
> - spicc->pow2_div.width = 3,
> - spicc->pow2_div.flags = CLK_DIVIDER_POWER_OF_TWO,
> + spicc->pow2_div.shift = 16;
> + spicc->pow2_div.width = 3;
> + spicc->pow2_div.flags = CLK_DIVIDER_POWER_OF_TWO;
> spicc->pow2_div.reg = spicc->base + SPICC_CONREG;
> spicc->pow2_div.hw.init = &init;
>
> @@ -721,8 +721,8 @@ static int meson_spicc_enh_clk_init(struct meson_spicc_device *spicc)
> }
> init.num_parents = 1;
>
> - enh_fixed_div->mult = 1,
> - enh_fixed_div->div = 2,
> + enh_fixed_div->mult = 1;
> + enh_fixed_div->div = 2;
> enh_fixed_div->hw.init = &init;
>
> clk = devm_clk_register(dev, &enh_fixed_div->hw);
> @@ -740,8 +740,8 @@ static int meson_spicc_enh_clk_init(struct meson_spicc_device *spicc)
> parent_data[0].hw = &enh_fixed_div->hw;
> init.num_parents = 1;
>
> - enh_div->shift = 16,
> - enh_div->width = 8,
> + enh_div->shift = 16;
> + enh_div->width = 8;
> enh_div->reg = spicc->base + SPICC_ENH_CTL0;
> enh_div->hw.init = &init;
>
> @@ -761,8 +761,8 @@ static int meson_spicc_enh_clk_init(struct meson_spicc_device *spicc)
> init.num_parents = 2;
> init.flags = CLK_SET_RATE_PARENT;
>
> - mux->mask = 0x1,
> - mux->shift = 24,
> + mux->mask = 0x1;
> + mux->shift = 24;
> mux->reg = spicc->base + SPICC_ENH_CTL0;
> mux->hw.init = &init;
>
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
More information about the linux-amlogic
mailing list