[PATCH] spi: meson-spicc: convert comma to semicolon
Chen Ni
nichen at iscas.ac.cn
Tue Jul 16 02:11:51 PDT 2024
Replace a comma between expression statements by a semicolon.
Fixes: 3e0cf4d3fc29 ("spi: meson-spicc: add a linear clock divider support")
Signed-off-by: Chen Ni <nichen at iscas.ac.cn>
---
drivers/spi/spi-meson-spicc.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index 8838a98b04c2..1d05590a7434 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -655,8 +655,8 @@ static int meson_spicc_pow2_clk_init(struct meson_spicc_device *spicc)
}
init.num_parents = 1;
- pow2_fixed_div->mult = 1,
- pow2_fixed_div->div = 4,
+ pow2_fixed_div->mult = 1;
+ pow2_fixed_div->div = 4;
pow2_fixed_div->hw.init = &init;
clk = devm_clk_register(dev, &pow2_fixed_div->hw);
@@ -674,9 +674,9 @@ static int meson_spicc_pow2_clk_init(struct meson_spicc_device *spicc)
parent_data[0].hw = &pow2_fixed_div->hw;
init.num_parents = 1;
- spicc->pow2_div.shift = 16,
- spicc->pow2_div.width = 3,
- spicc->pow2_div.flags = CLK_DIVIDER_POWER_OF_TWO,
+ spicc->pow2_div.shift = 16;
+ spicc->pow2_div.width = 3;
+ spicc->pow2_div.flags = CLK_DIVIDER_POWER_OF_TWO;
spicc->pow2_div.reg = spicc->base + SPICC_CONREG;
spicc->pow2_div.hw.init = &init;
@@ -721,8 +721,8 @@ static int meson_spicc_enh_clk_init(struct meson_spicc_device *spicc)
}
init.num_parents = 1;
- enh_fixed_div->mult = 1,
- enh_fixed_div->div = 2,
+ enh_fixed_div->mult = 1;
+ enh_fixed_div->div = 2;
enh_fixed_div->hw.init = &init;
clk = devm_clk_register(dev, &enh_fixed_div->hw);
@@ -740,8 +740,8 @@ static int meson_spicc_enh_clk_init(struct meson_spicc_device *spicc)
parent_data[0].hw = &enh_fixed_div->hw;
init.num_parents = 1;
- enh_div->shift = 16,
- enh_div->width = 8,
+ enh_div->shift = 16;
+ enh_div->width = 8;
enh_div->reg = spicc->base + SPICC_ENH_CTL0;
enh_div->hw.init = &init;
@@ -761,8 +761,8 @@ static int meson_spicc_enh_clk_init(struct meson_spicc_device *spicc)
init.num_parents = 2;
init.flags = CLK_SET_RATE_PARENT;
- mux->mask = 0x1,
- mux->shift = 24,
+ mux->mask = 0x1;
+ mux->shift = 24;
mux->reg = spicc->base + SPICC_ENH_CTL0;
mux->hw.init = &init;
--
2.25.1
More information about the linux-amlogic
mailing list