[PATCH v1] clk: meson: axg-audio: Use dev_err_probe() to simplfy code

[Jerome Brunet]

On Fri 30 Aug 2024 at 16:01, Chen Yufan <chenyufan at vivo.com> wrote:

> Use dev_err_probe() can make code a bit simpler.

It surely does but ...

>
> Signed-off-by: Chen Yufan <chenyufan at vivo.com>
> ---
>  drivers/clk/meson/axg-audio.c | 12 ++++--------

Why this driver alone ?

I have nothing against the change you are doing but I would not want to get a
single patch for each and every amlogic clock drivers.

>  1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c
> index e03a5bf899c0..0637b05a4c89 100644
> --- a/drivers/clk/meson/axg-audio.c
> +++ b/drivers/clk/meson/axg-audio.c
> @@ -1761,10 +1761,8 @@ static int axg_audio_clkc_probe(struct platform_device *pdev)
>  		return PTR_ERR(regs);
>  
>  	map = devm_regmap_init_mmio(dev, regs, &axg_audio_regmap_cfg);
> -	if (IS_ERR(map)) {
> -		dev_err(dev, "failed to init regmap: %ld\n", PTR_ERR(map));
> -		return PTR_ERR(map);
> -	}
> +	if (IS_ERR(map))
> +		return dev_err_probe(dev, PTR_ERR(map), "failed to init regmap: %ld\n");

This does not inspire a lot of confidence. Did you perfom any test
before sending this ?

I know you sent a v2 fixing this, but still ...

>  
>  	/* Get the mandatory peripheral clock */
>  	clk = devm_clk_get_enabled(dev, "pclk");
> @@ -1772,10 +1770,8 @@ static int axg_audio_clkc_probe(struct platform_device *pdev)
>  		return PTR_ERR(clk);
>  
>  	ret = device_reset(dev);
> -	if (ret) {
> -		dev_err_probe(dev, ret, "failed to reset device\n");
> -		return ret;
> -	}
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to reset device\n");
>  
>  	/* Populate regmap for the regmap backed clocks */
>  	for (i = 0; i < data->regmap_clk_num; i++)

Finally, it does not apply on my tree.
Check the PR sent to Stephen, you'll get all the details.

https://lore.kernel.org/linux-clk/1jjzfyrsbh.fsf@starbuckisacylon.baylibre.com/

-- 
Jerome