[PATCH 2/6] media: i2c: ov5645: Refactor ov5645_set_power_off()

[Ricardo Ribalda]

Factor out all the power off logic, except clk_disable_unprepare(), to a
new function __ov5645_set_power_off().

This allows ov5645_set_power_on() to excplicitly clean-out the clock
during the error-path.

The following smatch warning is fixed:
drivers/media/i2c/ov5645.c:690 ov5645_set_power_on() warn: 'ov5645->xclk' from clk_prepare_enable() not released on lines: 690.

Signed-off-by: Ricardo Ribalda <ribalda at chromium.org>
---
 drivers/media/i2c/ov5645.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index 6c2d221f6973..0c32bd2940ec 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -635,7 +635,7 @@ static int ov5645_set_register_array(struct ov5645 *ov5645,
 	return 0;
 }
 
-static int ov5645_set_power_off(struct device *dev)
+static void __ov5645_set_power_off(struct device *dev)
 {
 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
 	struct ov5645 *ov5645 = to_ov5645(sd);
@@ -643,8 +643,16 @@ static int ov5645_set_power_off(struct device *dev)
 	ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
 	gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
 	gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
-	clk_disable_unprepare(ov5645->xclk);
 	regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
+}
+
+static int ov5645_set_power_off(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ov5645 *ov5645 = to_ov5645(sd);
+
+	__ov5645_set_power_off(dev);
+	clk_disable_unprepare(ov5645->xclk);
 
 	return 0;
 }
@@ -686,7 +694,8 @@ static int ov5645_set_power_on(struct device *dev)
 	return 0;
 
 exit:
-	ov5645_set_power_off(dev);
+	__ov5645_set_power_off(dev);
+	clk_disable_unprepare(ov5645->xclk);
 	return ret;
 }
 

-- 
2.46.0.76.ge559c4bf1a-goog