[PATCH net-next v2 19/23] net: stmmac: dwmac-sunxi: use devm_stmmac_probe_config_dt()

Jernej Škrabec jernej.skrabec at gmail.com
Sun Sep 17 07:43:33 PDT 2023


Dne sobota, 16. september 2023 ob 09:58:25 CEST je Jisheng Zhang napisal(a):
> Simplify the driver's probe() function by using the devres
> variant of stmmac_probe_config_dt().
> 
> The remove_new() callback now needs to be switched to
> stmmac_pltfr_remove_no_dt().
> 
> Signed-off-by: Jisheng Zhang <jszhang at kernel.org>

Reviewed-by: Jernej Skrabec <jernej.skrabec at gmail.com>

Best regards,
Jernej

> ---
>  .../net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 25 +++++++------------
>  1 file changed, 9 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
> b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c index
> beceeae579bf..b857235f5b1f 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
> @@ -108,36 +108,31 @@ static int sun7i_gmac_probe(struct platform_device
> *pdev) if (ret)
>  		return ret;
> 
> -	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
> +	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
>  	if (IS_ERR(plat_dat))
>  		return PTR_ERR(plat_dat);
> 
>  	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
> -	if (!gmac) {
> -		ret = -ENOMEM;
> -		goto err_remove_config_dt;
> -	}
> +	if (!gmac)
> +		return -ENOMEM;
> 
>  	ret = of_get_phy_mode(dev->of_node, &gmac->interface);
>  	if (ret && ret != -ENODEV) {
>  		dev_err(dev, "Can't get phy-mode\n");
> -		goto err_remove_config_dt;
> +		return ret;
>  	}
> 
>  	gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
>  	if (IS_ERR(gmac->tx_clk)) {
>  		dev_err(dev, "could not get tx clock\n");
> -		ret = PTR_ERR(gmac->tx_clk);
> -		goto err_remove_config_dt;
> +		return PTR_ERR(gmac->tx_clk);
>  	}
> 
>  	/* Optional regulator for PHY */
>  	gmac->regulator = devm_regulator_get_optional(dev, "phy");
>  	if (IS_ERR(gmac->regulator)) {
> -		if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER) {
> -			ret = -EPROBE_DEFER;
> -			goto err_remove_config_dt;
> -		}
> +		if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
>  		dev_info(dev, "no regulator found\n");
>  		gmac->regulator = NULL;
>  	}
> @@ -155,7 +150,7 @@ static int sun7i_gmac_probe(struct platform_device
> *pdev)
> 
>  	ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv);
>  	if (ret)
> -		goto err_remove_config_dt;
> +		return ret;
> 
>  	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
>  	if (ret)
> @@ -165,8 +160,6 @@ static int sun7i_gmac_probe(struct platform_device
> *pdev)
> 
>  err_gmac_exit:
>  	sun7i_gmac_exit(pdev, plat_dat->bsp_priv);
> -err_remove_config_dt:
> -	stmmac_remove_config_dt(pdev, plat_dat);
> 
>  	return ret;
>  }
> @@ -179,7 +172,7 @@ MODULE_DEVICE_TABLE(of, sun7i_dwmac_match);
> 
>  static struct platform_driver sun7i_dwmac_driver = {
>  	.probe  = sun7i_gmac_probe,
> -	.remove_new = stmmac_pltfr_remove,
> +	.remove_new = stmmac_pltfr_remove_no_dt,
>  	.driver = {
>  		.name           = "sun7i-dwmac",
>  		.pm		= &stmmac_pltfr_pm_ops,







More information about the linux-amlogic mailing list