[PATCH net-next v2 19/23] net: stmmac: dwmac-sunxi: use devm_stmmac_probe_config_dt()
Jisheng Zhang
jszhang at kernel.org
Sat Sep 16 00:58:25 PDT 2023
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
---
.../net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 25 +++++++------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
index beceeae579bf..b857235f5b1f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -108,36 +108,31 @@ static int sun7i_gmac_probe(struct platform_device *pdev)
if (ret)
return ret;
- plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+ plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
if (IS_ERR(plat_dat))
return PTR_ERR(plat_dat);
gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
- if (!gmac) {
- ret = -ENOMEM;
- goto err_remove_config_dt;
- }
+ if (!gmac)
+ return -ENOMEM;
ret = of_get_phy_mode(dev->of_node, &gmac->interface);
if (ret && ret != -ENODEV) {
dev_err(dev, "Can't get phy-mode\n");
- goto err_remove_config_dt;
+ return ret;
}
gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
if (IS_ERR(gmac->tx_clk)) {
dev_err(dev, "could not get tx clock\n");
- ret = PTR_ERR(gmac->tx_clk);
- goto err_remove_config_dt;
+ return PTR_ERR(gmac->tx_clk);
}
/* Optional regulator for PHY */
gmac->regulator = devm_regulator_get_optional(dev, "phy");
if (IS_ERR(gmac->regulator)) {
- if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto err_remove_config_dt;
- }
+ if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
dev_info(dev, "no regulator found\n");
gmac->regulator = NULL;
}
@@ -155,7 +150,7 @@ static int sun7i_gmac_probe(struct platform_device *pdev)
ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv);
if (ret)
- goto err_remove_config_dt;
+ return ret;
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
if (ret)
@@ -165,8 +160,6 @@ static int sun7i_gmac_probe(struct platform_device *pdev)
err_gmac_exit:
sun7i_gmac_exit(pdev, plat_dat->bsp_priv);
-err_remove_config_dt:
- stmmac_remove_config_dt(pdev, plat_dat);
return ret;
}
@@ -179,7 +172,7 @@ MODULE_DEVICE_TABLE(of, sun7i_dwmac_match);
static struct platform_driver sun7i_dwmac_driver = {
.probe = sun7i_gmac_probe,
- .remove_new = stmmac_pltfr_remove,
+ .remove_new = stmmac_pltfr_remove_no_dt,
.driver = {
.name = "sun7i-dwmac",
.pm = &stmmac_pltfr_pm_ops,
--
2.40.1
More information about the linux-amlogic
mailing list