[PATCH 3/3] arm64: dts: Add pinctrl node for Amlogic T7 SoCs

[neil.armstrong at linaro.org]

On 14/09/2023 07:45, Huqiang Qin wrote:
> Add pinctrl device.
> 
> Signed-off-by: Huqiang Qin <huqiang.qin at amlogic.com>
> ---
>   arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> index dae3465bd39b..a03c7667d2b6 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> @@ -155,6 +155,22 @@ watchdog at 2100 {
>   				clocks = <&xtal>;
>   			};
>   
> +			periphs_pinctrl: pinctrl at 4000 {
> +				compatible = "amlogic,t7-periphs-pinctrl";
> +				#address-cells = <2>;
> +				#size-cells = <2>;
> +				ranges;
> +
> +				gpio: bank at 4000 {
> +					reg = <0x0 0x4000 0x0 0x0064>,
> +					      <0x0 0x40c0 0x0 0x0220>;
> +					reg-names = "mux", "gpio";
> +					gpio-controller;
> +					#gpio-cells = <2>;
> +					gpio-ranges = <&periphs_pinctrl 0 0 157>;
> +				};
> +			};
> +
>   			uart_a: serial at 78000 {
>   				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
>   				reg = <0x0 0x78000 0x0 0x18>;

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>