[PATCH 3/3] arm64: dts: Add pinctrl node for Amlogic T7 SoCs

Huqiang Qin huqiang.qin at amlogic.com
Wed Sep 13 22:45:25 PDT 2023


Add pinctrl device.

Signed-off-by: Huqiang Qin <huqiang.qin at amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index dae3465bd39b..a03c7667d2b6 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -155,6 +155,22 @@ watchdog at 2100 {
 				clocks = <&xtal>;
 			};
 
+			periphs_pinctrl: pinctrl at 4000 {
+				compatible = "amlogic,t7-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank at 4000 {
+					reg = <0x0 0x4000 0x0 0x0064>,
+					      <0x0 0x40c0 0x0 0x0220>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 157>;
+				};
+			};
+
 			uart_a: serial at 78000 {
 				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
 				reg = <0x0 0x78000 0x0 0x18>;
-- 
2.37.1




More information about the linux-amlogic mailing list