[PATCH V4] arm64: dts: add support for C3 based Amlogic AW409
neil.armstrong at linaro.org
neil.armstrong at linaro.org
Fri May 12 03:12:31 PDT 2023
On 12/05/2023 09:03, xianwei.zhao wrote:
> Hi Neil,
> Thank you for your reply.
>
> On 2023/5/11 16:39, Neil Armstrong wrote:
>> [ EXTERNAL EMAIL ]
>>
>> Hi,
>>
>> On 10/05/2023 11:11, Xianwei Zhao wrote:
>>> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
>>> applications.
>>>
>>> Add basic support for the C3 based Amlogic AW409 board, which describes
>>> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
>>> booting up into the serial console.
>>>
>>> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
>>> ---
>>> Link: https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@amlogic.com
>>> Link: https://lore.kernel.org/all/20230307222651.2106615-2-martin.blumenstingl@googlemail.com
>>>
>>> V3 -> V4: Move Link under the --- before the changelog.
>>> V2 -> V3: Remove '256m' from filename;
>>> Keep alphabetical order of Makefile.
>>> V1 -> V2: Remove new arch, and use ARCH_MESON;
>>> Modify node name, and delete superfluous blank line.
>>> ---
>>> arch/arm64/boot/dts/amlogic/Makefile | 1 +
>>> .../dts/amlogic/amlogic-c3-c302x-aw409.dts | 29 +++++++
>>> arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 86 +++++++++++++++++++
>>> 3 files changed, 116 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>>> create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>>> index cd1c5b04890a..6f61798a109f 100644
>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>> @@ -1,4 +1,5 @@
>>> # SPDX-License-Identifier: GPL-2.0
>>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
>>> dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
>>> dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>>> dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>>> new file mode 100644
>>> index 000000000000..edce8850b338
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>>> @@ -0,0 +1,29 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +/*
>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "amlogic-c3.dtsi"
>>> +
>>> +/ {
>>> + model = "Amlogic C302 aw409 Development Board";
>>> + compatible = "amlogic,aw409", "amlogic,c3";
>>> + interrupt-parent = <&gic>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> +
>>> + aliases {
>>> + serial0 = &uart_b;
>>> + };
>>> +
>>> + memory at 0 {
>>> + device_type = "memory";
>>> + reg = <0x0 0x0 0x0 0x10000000>;
>>> + };
>>> +};
>>> +
>>> +&uart_b {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>>> new file mode 100644
>>> index 000000000000..93b335aef605
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>>> @@ -0,0 +1,86 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +/*
>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +
>>> +/ {
>>> + cpus {
>>> + #address-cells = <2>;
>>> + #size-cells = <0>;
>>> +
>>> + cpu0: cpu at 0 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a35";
>>> + reg = <0x0 0x0>;
>>> + enable-method = "psci";
>>> + };
>>> +
>>> + cpu1: cpu at 1 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a35";
>>> + reg = <0x0 0x1>;
>>> + enable-method = "psci";
>>> + };
>>> + };
>>> +
>>> + timer {
>>> + compatible = "arm,armv8-timer";
>>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>>> + };
>>> +
>>> + psci {
>>> + compatible = "arm,psci-1.0";
>>> + method = "smc";
>>> + };
>>> +
>>> + xtal: xtal-clk {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <24000000>;
>>> + clock-output-names = "xtal";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + soc {
>>> + compatible = "simple-bus";
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> +
>>> + gic: interrupt-controller at fff01000 {
>>> + compatible = "arm,gic-400";
>>> + #interrupt-cells = <3>;
>>> + #address-cells = <0>;
>>> + interrupt-controller;
>>> + reg = <0x0 0xfff01000 0 0x1000>,
>>> + <0x0 0xfff02000 0 0x2000>,
>>> + <0x0 0xfff04000 0 0x2000>,
>>> + <0x0 0xfff06000 0 0x2000>;
>>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>>> + };
>>> +
>>> + apb4: bus at fe000000 {
>>> + compatible = "simple-bus";
>>> + reg = <0x0 0xfe000000 0x0 0x480000>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>>> +
>>> + uart_b: serial at 7a000 {
>>> + compatible = "amlogic,meson-g12a-uart";
>>
>> This should be:
>>
>> compatible = "amlogic,meson-g12a-uart", "amlogic,meson-gx-uart"
>>
>> to match the amlogic,meson-uart.yaml bindings.
>>
>
> I will use strings 'amlogic,meson-s4-uart' instead of these, because of board C3 is only use 12M clock source for serial, the same as s4 series.
Sure.
Neil
>
>> Please run :
>> make CHECK_DTBS=1 amlogic/amlogic-c3-c302x-aw409.dtb
>>
>> With that fixed, please add on v5:
>
> Will do.
>
>>
>> Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
>>
>>> + reg = <0x0 0x7a000 0x0 0x18>;
>>> + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
>>> + status = "disabled";
>>> + clocks = <&xtal>, <&xtal>, <&xtal>;
>>> + clock-names = "xtal", "pclk", "baud";
>>> + };
>>> +
>>> + };
>>> + };
>>> +};
>>>
>>> base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833
>>
More information about the linux-amlogic
mailing list