[PATCH V4] arm64: dts: add support for C3 based Amlogic AW409
xianwei.zhao
xianwei.zhao at amlogic.com
Fri May 12 00:03:26 PDT 2023
Hi Neil,
Thank you for your reply.
On 2023/5/11 16:39, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
>
> Hi,
>
> On 10/05/2023 11:11, Xianwei Zhao wrote:
>> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
>> applications.
>>
>> Add basic support for the C3 based Amlogic AW409 board, which describes
>> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
>> booting up into the serial console.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
>> ---
>> Link:
>> https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@amlogic.com
>> Link:
>> https://lore.kernel.org/all/20230307222651.2106615-2-martin.blumenstingl@googlemail.com
>>
>> V3 -> V4: Move Link under the --- before the changelog.
>> V2 -> V3: Remove '256m' from filename;
>> Keep alphabetical order of Makefile.
>> V1 -> V2: Remove new arch, and use ARCH_MESON;
>> Modify node name, and delete superfluous blank line.
>> ---
>> arch/arm64/boot/dts/amlogic/Makefile | 1 +
>> .../dts/amlogic/amlogic-c3-c302x-aw409.dts | 29 +++++++
>> arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 86 +++++++++++++++++++
>> 3 files changed, 116 insertions(+)
>> create mode 100644
>> arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>> create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile
>> b/arch/arm64/boot/dts/amlogic/Makefile
>> index cd1c5b04890a..6f61798a109f 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -1,4 +1,5 @@
>> # SPDX-License-Identifier: GPL-2.0
>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>> b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>> new file mode 100644
>> index 000000000000..edce8850b338
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>> @@ -0,0 +1,29 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "amlogic-c3.dtsi"
>> +
>> +/ {
>> + model = "Amlogic C302 aw409 Development Board";
>> + compatible = "amlogic,aw409", "amlogic,c3";
>> + interrupt-parent = <&gic>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + aliases {
>> + serial0 = &uart_b;
>> + };
>> +
>> + memory at 0 {
>> + device_type = "memory";
>> + reg = <0x0 0x0 0x0 0x10000000>;
>> + };
>> +};
>> +
>> +&uart_b {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> new file mode 100644
>> index 000000000000..93b335aef605
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> @@ -0,0 +1,86 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +/ {
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + cpu0: cpu at 0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a35";
>> + reg = <0x0 0x0>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu1: cpu at 1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a35";
>> + reg = <0x0 0x1>;
>> + enable-method = "psci";
>> + };
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
>> IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
>> IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
>> IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
>> IRQ_TYPE_LEVEL_LOW)>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> + };
>> +
>> + xtal: xtal-clk {
>> + compatible = "fixed-clock";
>> + clock-frequency = <24000000>;
>> + clock-output-names = "xtal";
>> + #clock-cells = <0>;
>> + };
>> +
>> + soc {
>> + compatible = "simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + gic: interrupt-controller at fff01000 {
>> + compatible = "arm,gic-400";
>> + #interrupt-cells = <3>;
>> + #address-cells = <0>;
>> + interrupt-controller;
>> + reg = <0x0 0xfff01000 0 0x1000>,
>> + <0x0 0xfff02000 0 0x2000>,
>> + <0x0 0xfff04000 0 0x2000>,
>> + <0x0 0xfff06000 0 0x2000>;
>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4)
>> | IRQ_TYPE_LEVEL_HIGH)>;
>> + };
>> +
>> + apb4: bus at fe000000 {
>> + compatible = "simple-bus";
>> + reg = <0x0 0xfe000000 0x0 0x480000>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>> +
>> + uart_b: serial at 7a000 {
>> + compatible = "amlogic,meson-g12a-uart";
>
> This should be:
>
> compatible = "amlogic,meson-g12a-uart", "amlogic,meson-gx-uart"
>
> to match the amlogic,meson-uart.yaml bindings.
>
I will use strings 'amlogic,meson-s4-uart' instead of these, because of
board C3 is only use 12M clock source for serial, the same as s4 series.
> Please run :
> make CHECK_DTBS=1 amlogic/amlogic-c3-c302x-aw409.dtb
>
> With that fixed, please add on v5:
Will do.
>
> Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
>
>> + reg = <0x0 0x7a000 0x0 0x18>;
>> + interrupts = <GIC_SPI 169
>> IRQ_TYPE_EDGE_RISING>;
>> + status = "disabled";
>> + clocks = <&xtal>, <&xtal>, <&xtal>;
>> + clock-names = "xtal", "pclk", "baud";
>> + };
>> +
>> + };
>> + };
>> +};
>>
>> base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833
>
More information about the linux-amlogic
mailing list