[PATCH v6 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Krzysztof Kozlowski]

On 07/12/2023 13:33, Anand Moon wrote:
> Hi Krzysztof
> 
> On Thu, 7 Dec 2023 at 14:00, Krzysztof Kozlowski
> <krzysztof.kozlowski at linaro.org> wrote:
>>
>> On 06/12/2023 18:14, Anand Moon wrote:
>>> Hi Rob,
>>>
>>> On Wed, 6 Dec 2023 at 19:23, Rob Herring <robh at kernel.org> wrote:
>>>>
>>>> On Mon, Dec 04, 2023 at 08:14:25PM +0530, Anand Moon wrote:
>>>>> Add the binding example for the USB3.1 Genesys Logic GL3523
>>>>> integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
>>>>> hub.
>>>>>
>>>>> For onboard hub controllers that support USB 3.x and USB 2.0 hubs
>>>>> with shared resets and power supplies, this property is used to identify
>>>>> the hubs with which these are shared.
>>>>>
>>>>> GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which serves
>>>>> power to the USB HUB, it uses 5V power regulator.
>>>>>
>>>>> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
>>>>> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
>>>>> ---
>>>>> V6: fix the description of the regulators
>>>>> Updated the commit message for regulator updates.
>>>>> add reviewed by Conor Dooley
>>>>> [1] https://lore.kernel.org/all/20231130053130.21966-2-linux.amoon@gmail.com/
>>>>> v5: upgrade peer-hub description : Conor Dooley
>>>>> [0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
>>>>> v4: Fix the description of peer-hub and update the commit message.
>>>>> Schematics of the Odroid N2+
>>>>> https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
>>>>> V3: fix the dt_binding_check error, added new example for Genesys GL3523
>>>>> v2: added Genesys GL3523 binding
>>>>> v1: none
>>>>> ---
>>>>>  .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
>>>>>  1 file changed, 61 insertions(+), 4 deletions(-)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
>>>>> index ee08b9c3721f..c6f63a69396d 100644
>>>>> --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
>>>>> +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
>>>>> @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
>>>>>  maintainers:
>>>>>    - Icenowy Zheng <uwu at icenowy.me>
>>>>>
>>>>> -allOf:
>>>>> -  - $ref: usb-device.yaml#
>>>>> -
>>>>>  properties:
>>>>>    compatible:
>>>>>      enum:
>>>>> @@ -27,12 +24,46 @@ properties:
>>>>>
>>>>>    vdd-supply:
>>>>>      description:
>>>>> -      the regulator that provides 3.3V core power to the hub.
>>>>> +      The regulator that provides 3.3V or 5.0V core power to the hub.
>>>>> +
>>>>> +  peer-hub:
>>>>> +    $ref: /schemas/types.yaml#/definitions/phandle
>>>>> +    description:
>>>>> +      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
>>>>> +      with shared resets and power supplies, this property is used to identify
>>>>> +      the hubs with which these are shared.
>>>>>
>>>>>  required:
>>>>>    - compatible
>>>>>    - reg
>>>>>
>>>>> +allOf:
>>>>> +  - $ref: usb-device.yaml#
>>>>> +  - if:
>>>>> +      properties:
>>>>> +        compatible:
>>>>> +          contains:
>>>>> +            enum:
>>>>> +              - usb5e3,608
>>>>> +    then:
>>>>> +      properties:
>>>>> +        peer-hub: false
>>>>> +        vdd-supply: false
>>>>> +        reset-gpios: true
>>>>> +
>>>>> +  - if:
>>>>> +      properties:
>>>>> +        compatible:
>>>>> +          contains:
>>>>> +            enum:
>>>>> +              - usb5e3,610
>>>>> +              - usb5e3,620
>>>>> +    then:
>>>>> +      properties:
>>>>> +        peer-hub: true
>>>>> +        vdd-supply: true
>>>>> +        reset-gpios: true
>>>>
>>>> No need for this if schema. The default is they are allowed.
>>>>
>>>
>>> If I move reset-gpios to required, I observe the below warning.
>>>
>>>   DTC_CHK Documentation/devicetree/bindings/usb/maxim,max33359.example.dtb
>>> /home/alarm/linux-amlogic-5.y-devel/Documentation/devicetree/bindings/usb/usb-device.example.dtb:
>>> hub at 1: 'reset-gpio' is a required property
>>>         from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
>>
>> Where are the properties defined? If you open the binding you see:
>> nowhere. You cannot define properties in some variant with "true".
>> Please define all of them in top-level and only narrow/constrain when
>> applicable.
>>
> What I meant is the example below, required meant applicable for both
> the binding
> But it shows me the above warning.

My explanation stands... So again:

>> Please define all of them in top-level and only narrow/constrain when
>> applicable.

Best regards,
Krzysztof