[PATCH v6 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Anand Moon]

Hi Krzysztof

On Thu, 7 Dec 2023 at 14:00, Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> wrote:
>
> On 06/12/2023 18:14, Anand Moon wrote:
> > Hi Rob,
> >
> > On Wed, 6 Dec 2023 at 19:23, Rob Herring <robh at kernel.org> wrote:
> >>
> >> On Mon, Dec 04, 2023 at 08:14:25PM +0530, Anand Moon wrote:
> >>> Add the binding example for the USB3.1 Genesys Logic GL3523
> >>> integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
> >>> hub.
> >>>
> >>> For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> >>> with shared resets and power supplies, this property is used to identify
> >>> the hubs with which these are shared.
> >>>
> >>> GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which serves
> >>> power to the USB HUB, it uses 5V power regulator.
> >>>
> >>> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> >>> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> >>> ---
> >>> V6: fix the description of the regulators
> >>> Updated the commit message for regulator updates.
> >>> add reviewed by Conor Dooley
> >>> [1] https://lore.kernel.org/all/20231130053130.21966-2-linux.amoon@gmail.com/
> >>> v5: upgrade peer-hub description : Conor Dooley
> >>> [0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
> >>> v4: Fix the description of peer-hub and update the commit message.
> >>> Schematics of the Odroid N2+
> >>> https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
> >>> V3: fix the dt_binding_check error, added new example for Genesys GL3523
> >>> v2: added Genesys GL3523 binding
> >>> v1: none
> >>> ---
> >>>  .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
> >>>  1 file changed, 61 insertions(+), 4 deletions(-)
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> >>> index ee08b9c3721f..c6f63a69396d 100644
> >>> --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> >>> +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> >>> @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
> >>>  maintainers:
> >>>    - Icenowy Zheng <uwu at icenowy.me>
> >>>
> >>> -allOf:
> >>> -  - $ref: usb-device.yaml#
> >>> -
> >>>  properties:
> >>>    compatible:
> >>>      enum:
> >>> @@ -27,12 +24,46 @@ properties:
> >>>
> >>>    vdd-supply:
> >>>      description:
> >>> -      the regulator that provides 3.3V core power to the hub.
> >>> +      The regulator that provides 3.3V or 5.0V core power to the hub.
> >>> +
> >>> +  peer-hub:
> >>> +    $ref: /schemas/types.yaml#/definitions/phandle
> >>> +    description:
> >>> +      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> >>> +      with shared resets and power supplies, this property is used to identify
> >>> +      the hubs with which these are shared.
> >>>
> >>>  required:
> >>>    - compatible
> >>>    - reg
> >>>
> >>> +allOf:
> >>> +  - $ref: usb-device.yaml#
> >>> +  - if:
> >>> +      properties:
> >>> +        compatible:
> >>> +          contains:
> >>> +            enum:
> >>> +              - usb5e3,608
> >>> +    then:
> >>> +      properties:
> >>> +        peer-hub: false
> >>> +        vdd-supply: false
> >>> +        reset-gpios: true
> >>> +
> >>> +  - if:
> >>> +      properties:
> >>> +        compatible:
> >>> +          contains:
> >>> +            enum:
> >>> +              - usb5e3,610
> >>> +              - usb5e3,620
> >>> +    then:
> >>> +      properties:
> >>> +        peer-hub: true
> >>> +        vdd-supply: true
> >>> +        reset-gpios: true
> >>
> >> No need for this if schema. The default is they are allowed.
> >>
> >
> > If I move reset-gpios to required, I observe the below warning.
> >
> >   DTC_CHK Documentation/devicetree/bindings/usb/maxim,max33359.example.dtb
> > /home/alarm/linux-amlogic-5.y-devel/Documentation/devicetree/bindings/usb/usb-device.example.dtb:
> > hub at 1: 'reset-gpio' is a required property
> >         from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
>
> Where are the properties defined? If you open the binding you see:
> nowhere. You cannot define properties in some variant with "true".
> Please define all of them in top-level and only narrow/constrain when
> applicable.
>
What I meant is the example below, required meant applicable for both
the binding
But it shows me the above warning.

required:
  - compatible
  - reg
  - reset-gpio

allOf:
  - $ref: usb-device.yaml#
  - if:
      properties:
        compatible:
          contains:
            enum:
              - usb5e3,608
    then:
      properties:
        peer-hub: false
        vdd-supply: false

  - if:
      properties:
        compatible:
          contains:
            enum:
              - usb5e3,610
              - usb5e3,620
    then:
      properties:
        peer-hub: true
        vdd-supply: true

additionalProperties: false

>
> Best regards,
> Krzysztof
>

Thanks
-Anand