[PATCH 1/3] arm64: meson: add dts bluetooth node for JetHub H1

Neil Armstrong narmstrong at baylibre.com
Fri Mar 25 10:32:59 PDT 2022


Hi,

On 25/03/2022 17:54, Vyacheslav Bocharov wrote:
> From: Vyacheslav Bocharov <devel at lexina.in>
> 
> Add bluetooth node for RTL8822CS uart to JetHub H1 dts file.
> 
> Signed-off-by: Vyacheslav Bocharov <adeep at lexina.in>
> ---
>   .../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts  | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
> index 6eafb908695f..a5ee7ed17efa 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
> @@ -213,6 +213,11 @@ &uart_A {
>   	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
>   	pinctrl-names = "default";
>   	uart-has-rtscts;

Please add a blank here to match other DT files.

> +	bluetooth {
> +		compatible = "realtek,rtl8822cs-bt";
> +		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> +		host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
> +       };
>   };
>   
>   &uart_C {




More information about the linux-amlogic mailing list