[PATCH 1/3] arm64: meson: add dts bluetooth node for JetHub H1
Vyacheslav Bocharov
adeep at lexina.in
Fri Mar 25 09:54:59 PDT 2022
From: Vyacheslav Bocharov <devel at lexina.in>
Add bluetooth node for RTL8822CS uart to JetHub H1 dts file.
Signed-off-by: Vyacheslav Bocharov <adeep at lexina.in>
---
.../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 6eafb908695f..a5ee7ed17efa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -213,6 +213,11 @@ &uart_A {
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
+ bluetooth {
+ compatible = "realtek,rtl8822cs-bt";
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+ };
};
&uart_C {
--
2.30.2
More information about the linux-amlogic
mailing list