[RFC PATCH 00/10] mmc: improve API to make clear {h|s}w_reset is for cards
Wolfram Sang
wsa+renesas at sang-engineering.com
Mon Mar 21 04:50:46 PDT 2022
As discussed in 2020 [1], Ulf and I agreed that it would be easier to
understand the {h|s}w_reset mechanisms if it was clear that they are for
cards. This RFC series implements that by adding 'card' to the function
names and changing the parameter to mmc_card where apropriate. Note that
I only changed the MMC core. The SDHCI driver still uses hw_reset in its
ops, I leave it to the SDHCI maintainers if they want to change that.
Also, I didn't convert CAP_HW_RESET to CAP_CARD_HW_RESET yet although it
should be done IMHO. However, we need an agreement on that first.
Finally, I also did not check if all the host drivers are really doing a
card reset or a controller reset. I tried but it was often not obvious
what is actually happening in these functions without proper manuals.
I tested it with my Renesas boards, so far no regressions. Buildbots are
currently checking the series. For this RFC, I sent this as one series
so people can get an overview and comment on that. For a proper release,
I think patches 1-5 should be one series, and 7-10 probably. Patch 6
could then be applied once patches 2-4 hit the net tree. That's my
proposal.
This series is based on mmc/next as of yesterday. A branch is here:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/mmc/reset-api
Looking forward to comments. Happy hacking,
Wolfram
[1] https://lore.kernel.org/all/20200916090121.2350-1-wsa+renesas@sang-engineering.com/
Wolfram Sang (10):
mmc: core: improve API to make clear mmc_hw_reset is for cards
ath10k: sdio: update to new MMC API for resetting cards
brcmfmac: sdio: update to new MMC API for resetting cards
mwifiex: sdio: update to new MMC API for resetting cards
wlcore: sdio: update to new MMC API for resetting cards
mmc: core: remove fallback for mmc_hw_reset()
mmc: core: improve API to make clear that mmc_sw_reset is for cards
mmc: core: improve API to make clear hw_reset from bus_ops is for
cards
mmc: core: improve API to make clear sw_reset from bus_ops is for
cards
mmc: improve API to make clear hw_reset callback is for cards
drivers/mmc/core/block.c | 2 +-
drivers/mmc/core/core.c | 31 ++++++++++---------
drivers/mmc/core/core.h | 4 +--
drivers/mmc/core/mmc.c | 10 +++---
drivers/mmc/core/mmc_test.c | 3 +-
drivers/mmc/core/sd.c | 8 ++---
drivers/mmc/core/sdio.c | 12 ++++---
drivers/mmc/host/bcm2835.c | 2 +-
drivers/mmc/host/dw_mmc.c | 2 +-
drivers/mmc/host/meson-mx-sdhc-mmc.c | 2 +-
drivers/mmc/host/mtk-sd.c | 2 +-
drivers/mmc/host/sdhci.c | 2 +-
drivers/mmc/host/sunxi-mmc.c | 2 +-
drivers/mmc/host/uniphier-sd.c | 2 +-
drivers/net/wireless/ath/ath10k/sdio.c | 2 +-
.../broadcom/brcm80211/brcmfmac/sdio.c | 2 +-
drivers/net/wireless/marvell/mwifiex/sdio.c | 2 +-
drivers/net/wireless/ti/wlcore/sdio.c | 2 +-
include/linux/mmc/core.h | 4 +--
include/linux/mmc/host.h | 2 +-
20 files changed, 51 insertions(+), 47 deletions(-)
--
2.30.2
More information about the linux-amlogic
mailing list