[PATCH v3 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver

Liang.Yang liang.yang at amlogic.com
Fri Mar 18 23:17:08 PDT 2022


Hi Neil,

On 2022/3/18 21:59, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
> 
> Hi,
> 
> On 18/03/2022 13:41, Liang Yang wrote:
>> convert txt to yaml and refine the meson NFC clock document.
>>
>> Signed-off-by: Liang Yang <liang.yang at amlogic.com>
>> ---
>>   .../bindings/mtd/amlogic,meson-nand.txt       | 60 ----------------
>>   .../bindings/mtd/amlogic,meson-nand.yaml      | 71 +++++++++++++++++++
>>   2 files changed, 71 insertions(+), 60 deletions(-)
>>   delete mode 100644 
>> Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>>   create mode 100644 
>> Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt 
>> b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> deleted file mode 100644
>> index 5794ab1147c1..000000000000
>> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> +++ /dev/null
>> @@ -1,60 +0,0 @@
>> -Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>> -
>> -This file documents the properties in addition to those available in
>> -the MTD NAND bindings.
>> -
>> -Required properties:
>> -- compatible : contains one of:
>> -  - "amlogic,meson-gxl-nfc"
>> -  - "amlogic,meson-axg-nfc"
>> -- clocks     :
>> -    A list of phandle + clock-specifier pairs for the clocks listed
>> -    in clock-names.
>> -
>> -- clock-names: Should contain the following:
>> -    "core" - NFC module gate clock
>> -    "device" - device clock from eMMC sub clock controller
>> -    "rx" - rx clock phase
>> -    "tx" - tx clock phase
>> -
>> -- amlogic,mmc-syscon    : Required for NAND clocks, it's shared with 
>> SD/eMMC
>> -                controller port C
>> -
>> -Optional children nodes:
>> -Children nodes represent the available nand chips.
>> -
>> -Other properties:
>> -see Documentation/devicetree/bindings/mtd/nand-controller.yaml for 
>> generic bindings.
>> -
>> -Example demonstrate on AXG SoC:
>> -
>> -    sd_emmc_c_clkc: mmc at 7000 {
>> -        compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
>> -        reg = <0x0 0x7000 0x0 0x800>;
>> -    };
>> -
>> -    nand-controller at 7800 {
>> -        compatible = "amlogic,meson-axg-nfc";
>> -        reg = <0x0 0x7800 0x0 0x100>;
>> -        #address-cells = <1>;
>> -        #size-cells = <0>;
>> -        interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>> -
>> -        clocks = <&clkc CLKID_SD_EMMC_C>,
>> -            <&sd_emmc_c_clkc CLKID_MMC_DIV>,
>> -            <&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
>> -            <&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
>> -        clock-names = "core", "device", "rx", "tx";
>> -        amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
>> -
>> -        pinctrl-names = "default";
>> -        pinctrl-0 = <&nand_pins>;
>> -
>> -        nand at 0 {
>> -            reg = <0>;
>> -            #address-cells = <1>;
>> -            #size-cells = <1>;
>> -
>> -            nand-on-flash-bbt;
>> -        };
>> -    };
>> diff --git 
>> a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml 
>> b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> new file mode 100644
>> index 000000000000..4de4962a40b7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> @@ -0,0 +1,71 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/amlogic,mmc-clkc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>> +
>> +maintainers:
>> +  - liang.yang at amlogic.com
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - "amlogic,meson-gxl-nfc"
>> +      - "amlogic,meson-axg-nfc"
>> +
>> +  reg:
>> +    maxItems: 2
> 
>    reg-names:
>      items:
>        - const: nfc
>        - const: mmc
> 
> Is missing to conform to the example
ok, i will add it.
> 
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 2
>> +
>> +  clock-names:
>> +    items:
>> +      - const: "core", "device"
> 
> This should be:
>    clock-names:
>      items:
>        - const: core
>        - const: device

ok, i will fix it.
> 
>> +
>> +  "#clock-cells":
>> +    const: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
> 
> + reg-names
ok
> 
>> +  - interrupts
>> +  - clocks
>> +  - clock-names
>> +  - "#clock-cells"
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    nand-controller at 7800 {
>> +    compatible = "amlogic,meson-axg-nfc";
>> +    reg = <0x0 0x7800 0x0 0x100>,
>> +          <0x0 0x7000 0x0 0x800>;
>> +        reg-names = "nfc", "emmc";
>> +    #address-cells = <1>;
>> +    #size-cells = <0>;
>> +    interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>> +
>> +    clocks = <&clkc CLKID_SD_EMMC_C>,
>> +        <&clkc CLKID_FCLK_DIV2>;
>> +    clock-names = "core", "device";
>> +
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&nand_pins>;
>> +
>> +    nand at 0 {
>> +        reg = <0>;
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +
>> +        nand-on-flash-bbt;
>> +    };
>> +     };
>> +
>> +...
> 
> Don't forgot to run :
> make ARCH=-arm64 dt_binding_check 
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml 
> 
> 
> after installing the DT schema validator:
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master
> 
> as documented at 
> https://www.kernel.org/doc/html/v5.9/devicetree/writing-schema.html
ok
> 
> Thanks !
> Neil
> 
> .



More information about the linux-amlogic mailing list