[v5 4/4] arm64: dts: meson: Add MagicBox M16S support

[Zhang Ning]

On Mon, Jul 25, 2022 at 06:32:17PM +0200, Krzysztof Kozlowski wrote:
> On 25/07/2022 01:17, Zhang Ning wrote:
> > MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
> > with spec:
> > 
> >  - Amlogic S912-H (S912 with dolby and dts)
> >  - 2G ddr3
> >  - 16G emmc
> >  - Marvell sd8897 BT/wifi module
> >  - 100M ethernet
> >  - IR reciever
> >  - 4K HDMI
> >  - AV out
> >  - Rest hole
> >  - 5V2A power input
> >  - white LED
> > 
> > it's q201_v1 according u-boot log.
> > and it's almost same as Q201 reference design.
> > 
> > add a simple dts to support this Tv box.
> > 
> > Signed-off-by: Zhang Ning <zhangn1985 at qq.com>
> > ---
> >  arch/arm64/boot/dts/amlogic/Makefile          |  1 +
> >  .../dts/amlogic/meson-gxm-magicbox-m16s.dts   | 40 +++++++++++++++++++
> >  2 files changed, 41 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > 
> > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> > index 8773211df50e..e0907fb41829 100644
> > --- a/arch/arm64/boot/dts/amlogic/Makefile
> > +++ b/arch/arm64/boot/dts/amlogic/Makefile
> > @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
> > +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-magicbox-m16s.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > new file mode 100644
> > index 000000000000..69e72687ac9c
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > @@ -0,0 +1,40 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2022 Zhang Ning <zhangn1985 at qq.com>
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "meson-gxm.dtsi"
> > +#include "meson-gx-p23x-q20x.dtsi"
> > +#include <dt-bindings/input/input.h>
> > +
> > +/ {
> > +	compatible = "magicbox,m16s", "amlogic,s912", "amlogic,meson-gxm";
> > +	model = "MagicBox M16S";
> > +
> > +	gpio-keys-polled {
> 
> Just gpio-keys (or even "keys").
I see all dts for amlogic platform are using gpio-keys-polled, could I
keep current name?
> 
> > +		compatible = "gpio-keys-polled";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> 
> Address/size cells are not correct.
Yes, this has been already pointed out in V3's review, but I forgot to
delete these 2 lines.
thank you review it again.

> 
> > +		poll-interval = <100>;
> > +
> > +		button-power {
> > +			label = "power";
> > +			linux,code = <KEY_POWER>;
> > +			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
> > +		};
> > +	};
> > +};
> 
> Missing blank line.
thank you, will add it in next version.
> 
> > +&ethmac {
> 
> 
> Best regards,
> Krzysztof