[v5 4/4] arm64: dts: meson: Add MagicBox M16S support

[Krzysztof Kozlowski]

On 25/07/2022 01:17, Zhang Ning wrote:
> MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
> with spec:
> 
>  - Amlogic S912-H (S912 with dolby and dts)
>  - 2G ddr3
>  - 16G emmc
>  - Marvell sd8897 BT/wifi module
>  - 100M ethernet
>  - IR reciever
>  - 4K HDMI
>  - AV out
>  - Rest hole
>  - 5V2A power input
>  - white LED
> 
> it's q201_v1 according u-boot log.
> and it's almost same as Q201 reference design.
> 
> add a simple dts to support this Tv box.
> 
> Signed-off-by: Zhang Ning <zhangn1985 at qq.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>  .../dts/amlogic/meson-gxm-magicbox-m16s.dts   | 40 +++++++++++++++++++
>  2 files changed, 41 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 8773211df50e..e0907fb41829 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-magicbox-m16s.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> new file mode 100644
> index 000000000000..69e72687ac9c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> @@ -0,0 +1,40 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2022 Zhang Ning <zhangn1985 at qq.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxm.dtsi"
> +#include "meson-gx-p23x-q20x.dtsi"
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	compatible = "magicbox,m16s", "amlogic,s912", "amlogic,meson-gxm";
> +	model = "MagicBox M16S";
> +
> +	gpio-keys-polled {

Just gpio-keys (or even "keys").

> +		compatible = "gpio-keys-polled";
> +		#address-cells = <1>;
> +		#size-cells = <0>;

Address/size cells are not correct.

> +		poll-interval = <100>;
> +
> +		button-power {
> +			label = "power";
> +			linux,code = <KEY_POWER>;
> +			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};

Missing blank line.

> +&ethmac {


Best regards,
Krzysztof