[PATCH v8 03/11] dt-bindings: clock: meson: add A1 peripheral clock controller bindings

[Dmitry Rokosov]

On Thu, Dec 01, 2022 at 10:10:04PM -0600, Rob Herring wrote:
> 
> On Fri, 02 Dec 2022 01:56:55 +0300, Dmitry Rokosov wrote:
> > From: Jian Hu <jian.hu at amlogic.com>
> > 
> > Add the documentation to support Amlogic A1 peripheral clock driver,
> > and add A1 peripheral clock controller bindings.
> > 
> > Signed-off-by: Jian Hu <jian.hu at amlogic.com>
> > Signed-off-by: Dmitry Rokosov <ddrokosov at sberdevices.ru>
> > ---
> >  .../bindings/clock/amlogic,a1-clkc.yaml       | 65 ++++++++++++
> >  include/dt-bindings/clock/a1-clkc.h           | 98 +++++++++++++++++++
> >  2 files changed, 163 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
> >  create mode 100644 include/dt-bindings/clock/a1-clkc.h
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> ./Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml: $id: relative path/filename doesn't match actual path or filename
> 	expected: http://devicetree.org/schemas/clock/amlogic,a1-clkc.yaml#
> Documentation/devicetree/bindings/clock/amlogic,a1-clkc.example.dts:18.48-30.11: Warning (unit_address_vs_reg): /example-0/periphs-clock-controller: node has a reg or ranges property, but no unit name
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.example.dtb: periphs-clock-controller: reg: [[0, 2048], [0, 260]] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221201225703.6507-4-ddrokosov@sberdevices.ru
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

That's totally right warnings and errors. All of them are fixed in the
my "fixup" patch of Jian's original dt_binding schema:

https://lore.kernel.org/linux-amlogic/20221201225703.6507-11-ddrokosov@sberdevices.ru/

-- 
Thank you,
Dmitry