[PATCH v8 03/11] dt-bindings: clock: meson: add A1 peripheral clock controller bindings

[Rob Herring]

On Fri, 02 Dec 2022 01:56:55 +0300, Dmitry Rokosov wrote:
> From: Jian Hu <jian.hu at amlogic.com>
> 
> Add the documentation to support Amlogic A1 peripheral clock driver,
> and add A1 peripheral clock controller bindings.
> 
> Signed-off-by: Jian Hu <jian.hu at amlogic.com>
> Signed-off-by: Dmitry Rokosov <ddrokosov at sberdevices.ru>
> ---
>  .../bindings/clock/amlogic,a1-clkc.yaml       | 65 ++++++++++++
>  include/dt-bindings/clock/a1-clkc.h           | 98 +++++++++++++++++++
>  2 files changed, 163 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
>  create mode 100644 include/dt-bindings/clock/a1-clkc.h
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/clock/amlogic,a1-clkc.yaml#
Documentation/devicetree/bindings/clock/amlogic,a1-clkc.example.dts:18.48-30.11: Warning (unit_address_vs_reg): /example-0/periphs-clock-controller: node has a reg or ranges property, but no unit name
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.example.dtb: periphs-clock-controller: reg: [[0, 2048], [0, 260]] is too long
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221201225703.6507-4-ddrokosov@sberdevices.ru

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.