[PATCH 1/2] arm64: dts: meson-axg: add support for JetHub D1p (j110)

Vyacheslav Bocharov adeep at lexina.in
Thu Aug 11 03:31:12 PDT 2022


- add support for JetHome JetHub D1p (https://jethome.ru/d1p) is a home
automation controller with the following features:
  - DIN Rail Mounting
  - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
  - no video out
  - 1/2/4GB LPDDR4
  - 8/16/32GB eMMC flash
  - 1 x USB 2.0
  - 1 x 10/100Mbps ethernet
  - WiFi / Bluetooth Realtek 8822CS or similar IEEE 802.11a/b/g/n/ac
  - TI CC2652P1 Zigbee Wireless Module with up to 20dBm output power
    and Zigbee 3.0 support.
  - 2 x gpio LEDS
  - GPIO user Button
  - 1 x 1-Wire
  - 2 x RS-485
  - 4 x dry contact digital GPIO inputs
  - 3 x relay GPIO outputs
  - DC source with a voltage of 9 to 56 V / Active POE

- unify device tree files for JetHub D1/D1p devices

Signed-off-by: Vyacheslav Bocharov <adeep at lexina.in>
---
 arch/arm64/boot/dts/amlogic/Makefile          |   2 +
 .../amlogic/meson-axg-jethome-jethub-j100.dts | 338 +----------------
 .../meson-axg-jethome-jethub-j110-rev-2.dts   |  37 ++
 .../meson-axg-jethome-jethub-j110-rev-3.dts   |  27 ++
 .../meson-axg-jethome-jethub-j1xx.dtsi        | 351 ++++++++++++++++++
 5 files changed, 421 insertions(+), 334 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8773211df50e..33e9c96af099 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 8b0d586aa84e..b2d6ba660914 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -1,270 +1,29 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright (c) 2021 Vyacheslav Bocharov <adeep at lexina.in>
- * Copyright (c) 2020 JetHome
- * Author: Aleksandr Kazantsev <ak at tvip.ru>
- * Author: Alexey Shevelkin <ash at tvip.ru>
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep at lexina.in>
+ * Copyright (c) 2022 JetHome
  * Author: Vyacheslav Bocharov <adeep at lexina.in>
  */
 
 /dts-v1/;
 
-#include "meson-axg.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
 
 / {
 	compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg";
-	model = "JetHome JetHub J100";
-	aliases {
-		serial0 = &uart_AO;   /* Console */
-		serial2 = &uart_AO_B; /* External UART (Wireless Module) */
-		ethernet0 = ðmac;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+	model = "JetHome JetHub D1 (J100)";
 
 	/* 1024MB RAM */
 	memory at 0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
-
-	reserved-memory {
-		linux,cma {
-			size = <0x0 0x400000>;
-		};
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vcc_5v: regulator-vcc_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_5v>;
-		regulator-always-on;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vccq_1v8: regulator-vccq_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCCQ_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	usb_pwr: regulator-usb_pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "USB_PWR";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_5v>;
-		regulator-always-on;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
-		clocks = <&wifi32k>;
-		clock-names = "ext_clock";
-	};
-
-	wifi32k: wifi32k {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-			thermal-sensors = <&scpi_sensors 0>;
-			trips {
-				cpu_passive: cpu-passive {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "passive";
-				};
-
-				cpu_hot: cpu-hot {
-					temperature = <80000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "hot";
-				};
-
-				cpu_critical: cpu-critical {
-					temperature = <100000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "critical";
-				};
-			};
-
-			cpu_cooling_maps: cooling-maps {
-				map0 {
-					trip = <&cpu_passive>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-
-				map1 {
-					trip = <&cpu_hot>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
-		#gpio-cells = <1>;
-	};
-};
-
-&efuse {
-	sn: sn at 32 {
-		reg = <0x32 0x20>;
-	};
-
-	eth_mac: eth_mac at 0 {
-		reg = <0x0 0x6>;
-	};
-
-	bt_mac: bt_mac at 6 {
-		reg = <0x6 0x6>;
-	};
-
-	wifi_mac: wifi_mac at c {
-		reg = <0xc 0x6>;
-	};
-
-	bid: bid at 12 {
-		reg = <0x12 0x20>;
-	};
-};
-
-&ethmac {
-	status = "okay";
-	pinctrl-0 = <&eth_rmii_x_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&eth_phy0>;
-	phy-mode = "rmii";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
-		eth_phy0: ethernet-phy at 0 {
-			/* compatible = "ethernet-phy-id0243.0c54";*/
-			max-speed = <100>;
-			reg = <0>;
-
-			reset-assert-us = <10000>;
-			reset-deassert-us = <10000>;
-			reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-/* Internal I2C bus (on CPU module) */
-&i2c1 {
-	status = "okay";
-	pinctrl-0 = <&i2c1_z_pins>;
-	pinctrl-names = "default";
-
-	/* RTC */
-	pcf8563: pcf8563 at 51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-		status = "okay";
-	};
 };
 
-/* Peripheral I2C bus (on motherboard) */
-&i2c_AO {
-	status = "okay";
-	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
-	pinctrl-names = "default";
-};
-
-&pwm_ab {
-	status = "okay";
-	pinctrl-0 = <&pwm_a_x20_pins>;
-	pinctrl-names = "default";
-};
 
 /* wifi module */
 &sd_emmc_b {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
 	non-removable;
-	disable-wp;
-
-	mmc-pwrseq = <&sdio_pwrseq>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
 
 	brcmf: wifi at 1 {
 		reg = <1>;
@@ -272,99 +31,10 @@ brcmf: wifi at 1 {
 	};
 };
 
-/* emmc storage */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	max-frequency = <200000000>;
-	non-removable;
-	disable-wp;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vccq_1v8>;
-};
-
 /* UART Bluetooth */
 &uart_B {
-	status = "okay";
-	pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
 	};
 };
-
-/* UART Console */
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-/* UART Wireless module */
-&uart_AO_B {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_b_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-	phy-supply = <&usb_pwr>;
-};
-
-&spicc1 {
-	status = "okay";
-	pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
-	pinctrl-names = "default";
-};
-
-&gpio {
-	gpio-line-names =
-		"", "", "", "", "", // 0 - 4
-		"", "", "", "", "", // 5 - 9
-		"UserButton", "", "", "", "", // 10 - 14
-		"", "", "", "", "", // 15 - 19
-		"", "", "", "", "", // 20 - 24
-		"", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
-		"Output1", "", "", "", "", // 30 - 34
-		"", "ZigBeeBOOT", "", "", "", // 35 - 39
-		"1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
-		"Input2", "Input1", "", "", "", // 45 - 49
-		"", "", "", "", "", // 50 - 54
-		"", "", "", "", "", // 55 - 59
-		"", "", "", "", "", // 60 - 64
-		"", "", "", "", "", // 65 - 69
-		"", "", "", "", "", // 70 - 74
-		"", "", "", "", "", // 75 - 79
-		"", "", "", "", "", // 80 - 84
-		"", ""; // 85-86
-};
-
-&cpu0 {
-	#cooling-cells = <2>;
-};
-
-&cpu1 {
-	#cooling-cells = <2>;
-};
-
-&cpu2 {
-	#cooling-cells = <2>;
-};
-
-&cpu3 {
-	#cooling-cells = <2>;
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
new file mode 100644
index 000000000000..0062667c4f65
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep at lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep at lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg";
+	model = "JetHome JetHub D1p (J110) HW rev.2";
+
+	/* 2GiB or 4GiB RAM */
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
+};
+
+/* UART Bluetooth */
+&uart_B {
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios  = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
new file mode 100644
index 000000000000..c2d22b00c1cd
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep at lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep at lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg";
+	model = "JetHome JetHub D1p (J110) Hw rev.3";
+
+	/* 2GiB or 4GiB RAM */
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
new file mode 100644
index 000000000000..5836b0030931
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep at lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep at lexina.in>
+ * Author: Aleksandr Kazantsev <ak at tvip.ru>
+ * Author: Alexey Shevelkin <ash at tvip.ru>
+ */
+
+/dts-v1/;
+
+#include "meson-axg.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;   /* Console */
+		serial2 = &uart_AO_B; /* External UART (Wireless Module) */
+		ethernet0 = ðmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		linux,cma {
+			size = <0x0 0x400000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vccq_1v8: regulator-vccq_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCQ_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&scpi_sensors 0>;
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cpu_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
+		#gpio-cells = <1>;
+	};
+};
+
+&efuse {
+	sn: sn at 32 {
+		reg = <0x32 0x20>;
+	};
+
+	eth_mac: eth_mac at 0 {
+		reg = <0x0 0x6>;
+	};
+
+	bt_mac: bt_mac at 6 {
+		reg = <0x6 0x6>;
+	};
+
+	wifi_mac: wifi_mac at c {
+		reg = <0xc 0x6>;
+	};
+
+	bid: bid at 12 {
+		reg = <0x12 0x20>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_x_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
+		eth_phy0: ethernet-phy at 0 {
+			/* compatible = "ethernet-phy-id0243.0c54";*/
+			max-speed = <100>;
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Internal I2C bus (on CPU module) */
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_z_pins>;
+	pinctrl-names = "default";
+
+	/* RTC */
+	pcf8563: pcf8563 at 51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		status = "okay";
+	};
+};
+
+/* Peripheral I2C bus (on motherboard) */
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_x20_pins>;
+	pinctrl-names = "default";
+};
+
+/* wifi module */
+&sd_emmc_b {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* emmc storage */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccq_1v8>;
+};
+
+/* UART Bluetooth */
+&uart_B {
+	status = "okay";
+	pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+/* UART Console */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* UART Wireless module */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&spicc1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
+	pinctrl-names = "default";
+};
+
+&gpio {
+	gpio-line-names =
+		"", "", "", "", "", // 0 - 4
+		"", "", "", "", "", // 5 - 9
+		"UserButton", "", "", "", "", // 10 - 14
+		"", "", "", "", "", // 15 - 19
+		"", "", "", "", "", // 20 - 24
+		"", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
+		"Output1", "", "", "", "", // 30 - 34
+		"", "ZigBeeBOOT", "", "", "", // 35 - 39
+		"1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
+		"Input2", "Input1", "", "", "", // 45 - 49
+		"", "", "", "", "", // 50 - 54
+		"", "", "", "", "", // 55 - 59
+		"", "", "", "", "", // 60 - 64
+		"", "", "", "", "", // 65 - 69
+		"", "", "", "", "", // 70 - 74
+		"", "", "", "", "", // 75 - 79
+		"", "", "", "", "", // 80 - 84
+		"", ""; // 85-86
+};
+
+&cpu0 {
+	#cooling-cells = <2>;
+};
+
+&cpu1 {
+	#cooling-cells = <2>;
+};
+
+&cpu2 {
+	#cooling-cells = <2>;
+};
+
+&cpu3 {
+	#cooling-cells = <2>;
+};
-- 
2.30.2




More information about the linux-amlogic mailing list