[PATCH 0/2] arm64: meson: add support for JetHome JetHub D1p (j110)

Vyacheslav Bocharov adeep at lexina.in
Thu Aug 11 03:31:11 PDT 2022


- add support for JetHome JetHub D1p (https://jethome.ru/d1p) is a home
automation controller with the following features:
  - DIN Rail Mounting
  - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
  - no video out
  - 1/2/4GB LPDDR4
  - 8/16/32GB eMMC flash
  - 1 x USB 2.0
  - 1 x 10/100Mbps ethernet
  - WiFi / Bluetooth Realtek 8822CS or similar IEEE 802.11a/b/g/n/ac
  - TI CC2652P1 Zigbee Wireless Module with up to 20dBm output power
    and Zigbee 3.0 support.
  - 2 x gpio LEDS
  - GPIO user Button
  - 1 x 1-Wire
  - 2 x RS-485
  - 4 x dry contact digital GPIO inputs
  - 3 x relay GPIO outputs
  - DC source with a voltage of 9 to 56 V / Active POE

- unify device tree files for JetHub D1/D1p devices

Vyacheslav Bocharov (2):
  arm64: dts: meson-axg: add support for JetHub D1p (j110)
  dt-bindings: arm: amlogic: add bindings for Jethub D1p (j110)

 .../devicetree/bindings/arm/amlogic.yaml      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   2 +
 .../amlogic/meson-axg-jethome-jethub-j100.dts | 338 +----------------
 .../meson-axg-jethome-jethub-j110-rev-2.dts   |  37 ++
 .../meson-axg-jethome-jethub-j110-rev-3.dts   |  27 ++
 .../meson-axg-jethome-jethub-j1xx.dtsi        | 351 ++++++++++++++++++
 6 files changed, 422 insertions(+), 334 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi

-- 
2.30.2




More information about the linux-amlogic mailing list