[PATCH] arm64: dts: meson-sm1: add spdifin spdifout nodes
Neil Armstrong
narmstrong at baylibre.com
Thu Sep 2 06:31:00 PDT 2021
Hi,
On 11/08/2021 07:09, Artem Lapkin wrote:
> Add spdifin spdifout spdifout_b nodes for Amlogic SM1 SoCs.
>
> Signed-off-by: Artem Lapkin <art at khadas.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 40 ++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> index 3d8b1f4f2..1efdbb61e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> @@ -356,6 +356,33 @@ tdmin_lb: audio-controller at 3c0 {
> status = "disabled";
> };
>
> + spdifin: audio-controller at 400 {
> + compatible = "amlogic,g12a-spdifin",
> + "amlogic,axg-spdifin";
> + reg = <0x0 0x400 0x0 0x30>;
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "SPDIFIN";
> + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
> + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
> + clock-names = "pclk", "refclk";
> + resets = <&clkc_audio AUD_RESET_SPDIFIN>;
> + status = "disabled";
> + };
> +
> + spdifout: audio-controller at 480 {
> + compatible = "amlogic,g12a-spdifout",
> + "amlogic,axg-spdifout";
> + reg = <0x0 0x480 0x0 0x50>;
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "SPDIFOUT";
> + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
> + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
> + clock-names = "pclk", "mclk";
> + resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
> + status = "disabled";
> + };
> +
> tdmout_a: audio-controller at 500 {
> compatible = "amlogic,sm1-tdmout";
> reg = <0x0 0x500 0x0 0x40>;
> @@ -401,6 +428,19 @@ tdmout_c: audio-controller at 580 {
> status = "disabled";
> };
>
> + spdifout_b: audio-controller at 680 {
> + compatible = "amlogic,g12a-spdifout",
> + "amlogic,axg-spdifout";
> + reg = <0x0 0x680 0x0 0x50>;
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "SPDIFOUT_B";
> + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
> + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
> + clock-names = "pclk", "mclk";
> + resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>;
> + status = "disabled";
> + };
> +
> toacodec: audio-controller at 740 {
> compatible = "amlogic,sm1-toacodec",
> "amlogic,g12a-toacodec";
>
Jerome could you quickly review this ?
Thanks,
Neil
More information about the linux-amlogic
mailing list