[PATCH 0/2] drm/bridge: dw-hdmi: disable loading of DW-HDMI CEC sub-driver

Laurent Pinchart laurent.pinchart at ideasonboard.com
Fri Apr 16 10:58:00 BST 2021


Hi Neil,

On Fri, Apr 16, 2021 at 11:27:35AM +0200, Neil Armstrong wrote:
> This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.
> 
> On some SoCs, the CEC functionality is enabled in the IP config bits, but the
> CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set
> but the DW-HDMI CEC signal is not connected to a physical pin, leading to some
> confusion when the DW-HDMI CEC controller can't communicate on the bus.

If we can't trust the CEC config bit, would it be better to not use it
at all, and instead let each platform glue logic tell whether to enable
CEC or not ?

> Jernej Skrabec (1):
>   drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC
>     driver
> 
> Neil Armstrong (1):
>   drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver
> 
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +-
>  drivers/gpu/drm/meson/meson_dw_hdmi.c     | 1 +
>  include/drm/bridge/dw_hdmi.h              | 2 ++
>  3 files changed, 4 insertions(+), 1 deletion(-)
> 

-- 
Regards,

Laurent Pinchart



More information about the linux-amlogic mailing list