[PATCH 4/4] clk: meson: axg: add MIPI DSI Host clock
Neil Armstrong
narmstrong at baylibre.com
Thu Sep 10 07:48:26 EDT 2020
On 10/09/2020 12:15, Jerome Brunet wrote:
>
> On Mon 07 Sep 2020 at 11:38, Neil Armstrong <narmstrong at baylibre.com> wrote:
>
>> This adds the MIPI DSI Host clock, used to measure the signal timings (ENC VSYNC or
>> DW-MIPI-DSI eDPI timings).
>>
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>> ---
>> drivers/clk/meson/axg.c | 66 +++++++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/axg.h | 4 ++-
>> 2 files changed, 69 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
>> index 2550616c14b0..0094ca6388d8 100644
>> --- a/drivers/clk/meson/axg.c
>> +++ b/drivers/clk/meson/axg.c
>> @@ -1724,6 +1724,66 @@ static struct clk_regmap axg_cts_encl = {
>> },
>> };
>>
>> +/* MIPI DSI Host Clock */
>> +
>> +static const struct clk_parent_data axg_vdin_meas_parent_data[] = {
>> + { .fw_name = "xtal", },
>> + { .hw = &axg_fclk_div4.hw },
>> + { .hw = &axg_fclk_div3.hw },
>> + { .hw = &axg_fclk_div5.hw },
>> + { },
>> + { },
>
> As you've done in other patches, I'd prefer if you used an index table
> instead of having empty entries.
>
>> + { .hw = &axg_fclk_div2.hw },
>> + { .hw = &axg_fclk_div7.hw },
>> +};
OK, will do
>> +
>> +static struct clk_regmap axg_vdin_meas_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_VDIN_MEAS_CLK_CNTL,
>> + .mask = 0x7,
>> + .shift = 21,
>> + .flags = CLK_MUX_ROUND_CLOSEST,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vdin_meas_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = axg_vdin_meas_parent_data,
>> + .num_parents = ARRAY_SIZE(axg_vdin_meas_parent_data),
>> + .flags = CLK_SET_RATE_NO_REPARENT,
>
> A comment about why manual control is required would be nice.
This is a typo, will remove.
>
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vdin_meas_div = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = HHI_VDIN_MEAS_CLK_CNTL,
>> + .shift = 12,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "vdin_meas_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vdin_meas_sel.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap axg_vdin_meas = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_VDIN_MEAS_CLK_CNTL,
>> + .bit_idx = 20,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "vdin_meas",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &axg_vdin_meas_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> static u32 mux_table_gen_clk[] = { 0, 4, 5, 6, 7, 8,
>> 9, 10, 11, 13, 14, };
>> static const struct clk_parent_data gen_clk_parent_data[] = {
>> @@ -1987,6 +2047,9 @@ static struct clk_hw_onecell_data axg_hw_onecell_data = {
>> [CLKID_VCLK2_DIV12] = &axg_vclk2_div12.hw,
>> [CLKID_CTS_ENCL_SEL] = &axg_cts_encl_sel.hw,
>> [CLKID_CTS_ENCL] = &axg_cts_encl.hw,
>> + [CLKID_VDIN_MEAS_SEL] = &axg_vdin_meas_sel.hw,
>> + [CLKID_VDIN_MEAS_DIV] = &axg_vdin_meas_div.hw,
>> + [CLKID_VDIN_MEAS] = &axg_vdin_meas.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -2115,6 +2178,9 @@ static struct clk_regmap *const axg_clk_regmaps[] = {
>> &axg_vclk2_div12_en,
>> &axg_cts_encl_sel,
>> &axg_cts_encl,
>> + &axg_vdin_meas_sel,
>> + &axg_vdin_meas_div,
>> + &axg_vdin_meas,
>> };
>>
>> static const struct meson_eeclkc_data axg_clkc_data = {
>> diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
>> index a8787b394a47..481b307ea3cb 100644
>> --- a/drivers/clk/meson/axg.h
>> +++ b/drivers/clk/meson/axg.h
>> @@ -158,8 +158,10 @@
>> #define CLKID_VCLK2_DIV6_EN 120
>> #define CLKID_VCLK2_DIV12_EN 121
>> #define CLKID_CTS_ENCL_SEL 132
>> +#define CLKID_VDIN_MEAS_SEL 134
>> +#define CLKID_VDIN_MEAS_DIV 135
>>
>> -#define NR_CLKS 134
>> +#define NR_CLKS 137
>>
>> /* include the CLKIDs that have been made part of the DT binding */
>> #include <dt-bindings/clock/axg-clkc.h>
>
More information about the linux-amlogic
mailing list