[PATCH 4/4] clk: meson: axg: add MIPI DSI Host clock
Jerome Brunet
jbrunet at baylibre.com
Thu Sep 10 06:15:57 EDT 2020
On Mon 07 Sep 2020 at 11:38, Neil Armstrong <narmstrong at baylibre.com> wrote:
> This adds the MIPI DSI Host clock, used to measure the signal timings (ENC VSYNC or
> DW-MIPI-DSI eDPI timings).
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> drivers/clk/meson/axg.c | 66 +++++++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/axg.h | 4 ++-
> 2 files changed, 69 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
> index 2550616c14b0..0094ca6388d8 100644
> --- a/drivers/clk/meson/axg.c
> +++ b/drivers/clk/meson/axg.c
> @@ -1724,6 +1724,66 @@ static struct clk_regmap axg_cts_encl = {
> },
> };
>
> +/* MIPI DSI Host Clock */
> +
> +static const struct clk_parent_data axg_vdin_meas_parent_data[] = {
> + { .fw_name = "xtal", },
> + { .hw = &axg_fclk_div4.hw },
> + { .hw = &axg_fclk_div3.hw },
> + { .hw = &axg_fclk_div5.hw },
> + { },
> + { },
As you've done in other patches, I'd prefer if you used an index table
instead of having empty entries.
> + { .hw = &axg_fclk_div2.hw },
> + { .hw = &axg_fclk_div7.hw },
> +};
> +
> +static struct clk_regmap axg_vdin_meas_sel = {
> + .data = &(struct clk_regmap_mux_data){
> + .offset = HHI_VDIN_MEAS_CLK_CNTL,
> + .mask = 0x7,
> + .shift = 21,
> + .flags = CLK_MUX_ROUND_CLOSEST,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "vdin_meas_sel",
> + .ops = &clk_regmap_mux_ops,
> + .parent_data = axg_vdin_meas_parent_data,
> + .num_parents = ARRAY_SIZE(axg_vdin_meas_parent_data),
> + .flags = CLK_SET_RATE_NO_REPARENT,
A comment about why manual control is required would be nice.
> + },
> +};
> +
> +static struct clk_regmap axg_vdin_meas_div = {
> + .data = &(struct clk_regmap_div_data){
> + .offset = HHI_VDIN_MEAS_CLK_CNTL,
> + .shift = 12,
> + .width = 7,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "vdin_meas_div",
> + .ops = &clk_regmap_divider_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &axg_vdin_meas_sel.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap axg_vdin_meas = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = HHI_VDIN_MEAS_CLK_CNTL,
> + .bit_idx = 20,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "vdin_meas",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &axg_vdin_meas_div.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> static u32 mux_table_gen_clk[] = { 0, 4, 5, 6, 7, 8,
> 9, 10, 11, 13, 14, };
> static const struct clk_parent_data gen_clk_parent_data[] = {
> @@ -1987,6 +2047,9 @@ static struct clk_hw_onecell_data axg_hw_onecell_data = {
> [CLKID_VCLK2_DIV12] = &axg_vclk2_div12.hw,
> [CLKID_CTS_ENCL_SEL] = &axg_cts_encl_sel.hw,
> [CLKID_CTS_ENCL] = &axg_cts_encl.hw,
> + [CLKID_VDIN_MEAS_SEL] = &axg_vdin_meas_sel.hw,
> + [CLKID_VDIN_MEAS_DIV] = &axg_vdin_meas_div.hw,
> + [CLKID_VDIN_MEAS] = &axg_vdin_meas.hw,
> [NR_CLKS] = NULL,
> },
> .num = NR_CLKS,
> @@ -2115,6 +2178,9 @@ static struct clk_regmap *const axg_clk_regmaps[] = {
> &axg_vclk2_div12_en,
> &axg_cts_encl_sel,
> &axg_cts_encl,
> + &axg_vdin_meas_sel,
> + &axg_vdin_meas_div,
> + &axg_vdin_meas,
> };
>
> static const struct meson_eeclkc_data axg_clkc_data = {
> diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
> index a8787b394a47..481b307ea3cb 100644
> --- a/drivers/clk/meson/axg.h
> +++ b/drivers/clk/meson/axg.h
> @@ -158,8 +158,10 @@
> #define CLKID_VCLK2_DIV6_EN 120
> #define CLKID_VCLK2_DIV12_EN 121
> #define CLKID_CTS_ENCL_SEL 132
> +#define CLKID_VDIN_MEAS_SEL 134
> +#define CLKID_VDIN_MEAS_DIV 135
>
> -#define NR_CLKS 134
> +#define NR_CLKS 137
>
> /* include the CLKIDs that have been made part of the DT binding */
> #include <dt-bindings/clock/axg-clkc.h>
More information about the linux-amlogic
mailing list