[PATCH v1 0/3] Add missing ethernet reset ID for Amlogic SoC
Anand Moon
linux.amoon at gmail.com
Thu Jul 30 14:04:16 EDT 2020
Hi Jerome,
On Thu, 30 Jul 2020 at 19:25, Jerome Brunet <jbrunet at baylibre.com> wrote:
>
>
> On Thu 30 Jul 2020 at 15:46, Anand Moon <linux.amoon at gmail.com> wrote:
>
> > Hi Jerome
> >
> > On Thu, 30 Jul 2020 at 17:44, Jerome Brunet <jbrunet at baylibre.com> wrote:
> >>
> >>
> >> On Thu 30 Jul 2020 at 13:57, Jerome Brunet <jbrunet at baylibre.com> wrote:
> >>
> >> > On Thu 30 Jul 2020 at 12:02, Anand Moon <linux.amoon at gmail.com> wrote:
> >> >
> >> >> These patch fix the Ethernet issue on Odroid C2 & Odroid N2
> >> >> Some time Ethernet interface come up but no DHCP request
> >> >> is forwaded to the Router, this happens quite offern on
> >> >> my side. Adding Reset controller to ethernet node FIx the
> >> >> inilization issue.
> >> >>
> >> >
> >> > I'm seeing this on other device as well. Strange that it pops up only
> >> > now. Change tested on S905x, seems to help.
> >>
> >> Strike that one - still seeing random DHCP issue on boot with this
> >> applied
> >>
> >> >
> >> >> -Anand
> >> >>
> >> >> Anand Moon (3):
> >> >> arm64: dts: amlogic: meson-gx: add missing ethernet reset ID
> >> >> arm64: dts: amlogic: meson-axg: add missing ethernet reset ID
> >> >> arm64: dts: amlogic: meson-g12: add missing ethernet reset ID
> >> >
> >> > None of the patches apply, please rebase on kevin's dt64 branch.
> >> >
> >> > With that, you can add
> >> >
> >> > Tested-by: Jerome Brunet <jbrunet at baylibre.com>
> >>
> > So I have to drop the Tested-by ?
>
> Yes
>
> >
> >> So still worth rebasing and applying on I suppose but I don't think it
> >> solves the problem as described in this cover letter.
> >>
> >
> > I have a mac address mapped to the ip address on my router,
> > So I am just testing with the latest u-boot-2000.07 on my boards.
> > Usually the ethernet comes up with no packet getting forwarded,
> > Even ping to the device is not working, which is what I observed at
> > my end many times.
>
> This is not the use case descibed in the cover letter. Please clarify if
> you resubmit.
>
This was some observation at my end. If these changes don't fix the issue.
I will drop my observation and just send the missing reset controller
for ethernet
-Anand
More information about the linux-amlogic
mailing list