[PATCH v1 0/3] Add missing ethernet reset ID for Amlogic SoC

Jerome Brunet jbrunet at baylibre.com
Thu Jul 30 09:55:14 EDT 2020


On Thu 30 Jul 2020 at 15:46, Anand Moon <linux.amoon at gmail.com> wrote:

> Hi Jerome
>
> On Thu, 30 Jul 2020 at 17:44, Jerome Brunet <jbrunet at baylibre.com> wrote:
>>
>>
>> On Thu 30 Jul 2020 at 13:57, Jerome Brunet <jbrunet at baylibre.com> wrote:
>>
>> > On Thu 30 Jul 2020 at 12:02, Anand Moon <linux.amoon at gmail.com> wrote:
>> >
>> >> These patch fix the Ethernet issue on Odroid C2 & Odroid N2
>> >> Some time Ethernet interface come up but no DHCP request
>> >> is forwaded to the Router, this happens quite offern on
>> >> my side. Adding Reset controller to ethernet node FIx the
>> >> inilization issue.
>> >>
>> >
>> > I'm seeing this on other device as well. Strange that it pops up only
>> > now. Change tested on S905x, seems to help.
>>
>> Strike that one - still seeing random DHCP issue on boot with this
>> applied
>>
>> >
>> >> -Anand
>> >>
>> >> Anand Moon (3):
>> >>   arm64: dts: amlogic: meson-gx: add missing ethernet reset ID
>> >>   arm64: dts: amlogic: meson-axg: add missing ethernet reset ID
>> >>   arm64: dts: amlogic: meson-g12: add missing ethernet reset ID
>> >
>> > None of the patches apply, please rebase on kevin's dt64 branch.
>> >
>> > With that, you can add
>> >
>> > Tested-by: Jerome Brunet <jbrunet at baylibre.com>
>>
> So I have to drop the Tested-by  ?

Yes

>
>> So still worth rebasing and applying on I suppose but I don't think it
>> solves the problem as described in this cover letter.
>>
>
> I have a mac address mapped to the ip address on my router,
> So I am just testing with the latest u-boot-2000.07 on my boards.
> Usually the ethernet comes up with no packet getting forwarded,
> Even ping to the device is not working, which is what I observed at
> my end many times.

This is not the use case descibed in the cover letter. Please clarify if
you resubmit.

>
> I will try to rebase on top of Kevin's v5.9/dt64 if needed.

If you intend on submitting the series again, rebasing is necessary.

> Please let me know.
>
> -Anand




More information about the linux-amlogic mailing list